Overview (2 pages max)DatapathControlSally and Tran 1Overview (2 pages max)What works: (Give the TA as much info as you can here. Special cases that work are fine. e.g. we got mode 1 fine. Mode 2 works if we use a big pixel and transmit letters with even parity, but only if we turn out the room lights.)How does your mode 2 implementation work? (the following is suggested format only. As long as you cover all of the material, organize it however you like)Frame Size: (e.g. 64x128)When do you transmit mode 2 info? (e.g. end of frame, immediate, …)When do you compute thresholds, check for falling edges, latch message data? (e.g. between pixels, at end of line, end of frame,…) What caused the most problems?What are you most proud of?How many hours did you each spend on the project? (e.g. Bob 50, Bill 35)How was the work divided? (e.g. Sally did the datapath and debugged mode 1, and Tran did most of the controller parts that worked. We both worked together on debugging mode 2. Tran’s first datapath blew up the ADC, but he was a wizard with a Moore machine.)Sally and Tran 2DatapathMake sure to show: OE, CLK, LATCH, and other important control signals! I’ve left out lots of detail that you should include.Data bus8OELDREG ASRAMWEOERowLDCNTColLDCNT67ADCOEVCLKSerialXmitLDGOto PCSally and Tran 3ControlShow a block diagram of the controller indicating all of the control signals (inputs, outputs, handshaking, …) No state machines
View Full Document