UNIVERSITY OF CALIFORNIA AT BERKELEYCollege of EngineeringDepartment of Electrical Engineering and Computer SciencesEE105 Lab Exp er imentsReport 9: MOS Characterization and AmplifiersName:Lab Section:3.1.2 Attach your printout.3.1.3 Approximately what criterion determines the boundary between saturatio n and triode?3.1.4 Properties (Part 1)gm=ro=Region of Operation:3.1.5 Properties (Part 2)gm=ro=Region of Operation:3.2.1 Channel Length Modulation Factorλ =3.2.3 Attach plo t of (ID)12vs. VG.3.2.4 Find Kn.Kn=3.2.5 Find VT H.VT=3.3.2 Identify the two amplifier s tages.123.2.3 Find the DC bias of VINfor maximum ga in. Find the gain and output swing at this bias point. Whatproblems might we encounter w ith biasing exactly at the point of maximum gain?VIN=Av=Output Voltage Swing:3.3.4 What problems might we run into if the resistor were too big or too
View Full Document