Name:_____________________ Student ID:_____________________ Name:_____________________ Student ID:_____________________ Section:_____________________ Date:_____________________ UNIVERSITY OF CALIFORNIA, BERKELEY EE40: Introduction to Microelectronic Circuits Equivalent Circuits Report Equivalent Resistor Networks 1) Step1: Max Current through resistor network:_______________________ 2) Step 2: Resistance across A and B. Theory: _______ Measured: _______ 3) Step 3: VAB I4) Step 5: VAB I 5) Steps 6, 7, and 8, measure VTH, ISC, and RTH. The theoretical values should have been calculated in your prelab. Theory Actual VTH: ISC: RTH: 6) Steps 9-13 Original Thevenin Norton V I V I V I 220 Ω 1.2 kΩ 2.2 kΩ7) Steps 15, 16, and 17. Measure VTH, ISC, and RTH. The theoretical values should have been calculated in your prelab. Theory Actual VTH: ISC: RTH: 8) Step 19. Measure the power delivered to the load resistor in Step 18. The theoretical value should have been calculated in your prelab. Theory Actual PMax: 9) Step 20. Measure the power delivered to the 2 other resistors that you chose for RL. Also note down their resistances. RL Power Please give values here 10) Step 22. Confirm the power delivered to the load resistor in Step 18. Also, confirm that the power is the same as was noted in Step 8 above. Actual
View Full Document