DOC PREVIEW
USC EE 459Lx - H11B2

This preview shows page 1-2-3 out of 8 pages.

Save
View full document
View full document
Premium Document
Do you want full access? Go Premium and unlock all 8 pages.
Access to all documents
Download any document
Ad free experience
View full document
Premium Document
Do you want full access? Go Premium and unlock all 8 pages.
Access to all documents
Download any document
Ad free experience
View full document
Premium Document
Do you want full access? Go Premium and unlock all 8 pages.
Access to all documents
Download any document
Ad free experience
Premium Document
Do you want full access? Go Premium and unlock all 8 pages.
Access to all documents
Download any document
Ad free experience

Unformatted text preview:

DESCRIPTIONThe CNX48U, H11BX, MOC8080 and TIL113 have agallium arsenide infrared emitter optically coupled to asilicon planar photodarlington.PHOTODARLINGTON OPTOCOUPLERSCNX48U H11B1 H11B2 H11B255 H11B3MOC8080 TIL113APPLICATIONS • Low power logic circuits• Telecommunications equipment• Portable electronics• Solid state relays• Interfacing coupling systems of different potentials and impedances.6/1/00 200042AFEATURES• High sensitivity to low input drive current• Meets or exceeds all JEDEC Registered Specifications• VDE 0884 approval available as a test option-add option .300. (e.g., H11B1.300)616161EMITTERCOLLECTOR123ANODECATHODE456BASEN/CSCHEMATICParameter Symbol Device Value UnitsTOTAL DEVICETSTGAll -55 to +150 °CStorage TemperatureOperating Temperature TOPRAll -55 to +100 °CLead Solder Temperature TSOLAll 260 for 10 sec °CTotal Device Power Dissipation @ TA= 25°CPDAll250 mWDerate above 25°C 3.3 mW/°CEMITTERIFAll 100 mAContinuous Forward CurrentReverse Voltage VRAll 6 VForward Current - Peak (300 µs, 2% Duty Cycle) IF(pk) All 3.0 ALED Power Dissipation @ TA= 25°CPDAll100 mWDerate above 25°C 1.8 mW/°CDETECTOR CNX48U, TIL113 30H11B1, H11B225Collector-Emitter Breakdown VoltageBVCEOH11B3 VH11B25555MOC8080CNX48U, H11B1H11B2, H11B3 30 VCollector-Base Breakdown Voltage BVCBOTIL113H11B25555 VMOC8080Emitter-Collector Breakdown Voltage BVECOAll 7 VDetector Power Dissipation @ TA= 25°CPDAll150 mWDerate above 25°C 2.0 mW/°C6/1/00 200042AParameter Test Conditions Symbol Device Min Typ** Max UnitEMITTER H11B1, H11B2(IF= 10 mA)H11B2550.8 1.2 1.5 MOC8080Input Forward Voltage VFTIL113V(IF= 10 mA) CNX48U 1.2 1.3(IF= 10 mA, TA= -55°C)MOC80800.9 1.3 1.7(IF= 10 mA, TA= 100°C) 0.7 1.05 1.4(IF= 50 mA) H11B3 1.35 1.5Reverse Leakage Current (VR= 6 V) IRAll 0.001 10 µACapacitance (VF= 0 V, f = 1.0 MHz) C All 50 pFDETECTOR(IC= 1 mA, IF= 0) CNX48U30 60Collector-Emitter(IC= 100 µA, IF= 0)BVCEOTIL113Breakdown Voltage (IC= 10 mA, IF= 0)H11B1, H11B225 60VH11B3(IC= 100 µA, IF= 0) H11B25555 70(IC= 1 mA, IF= 0) MOC8080CNX48U, H11B1Collector-Base(IC= 100 µA, IE= 0) H11B2, H11B3 30 100Breakdown VoltageBVCBOTIL113 V(IC= 100 µA, IF= 0)H11B25555 100MOC8080Emitter-Collector (IE= 100 µA, IB= 0) BVECOAll 7 10 VBreakdown VoltageCollector-Emitter (VCE= 10 V, Base Open) ICEOAll 1 100 nADark CurrentINDIVIDUAL COMPONENT CHARACTERISTICSELECTRICAL CHARACTERISTICS (TA= 25°CUnless otherwise specified.)PHOTODARLINGTON OPTOCOUPLERSCNX48U H11B1 H11B2 H11B255 H11B3MOC8080 TIL113Note** Typical values at TA= 25°CCharacteristic Test Conditions Symbol Min Typ** Max UnitsInput-Output Isolation Voltage(2)(II-O6 1 µA, Vrms, t = 1 min.) 5300 Vac(rms)Isolation Resistance(2)(VI-O = 500 VDC) RISO10111Isolation Capacitance(2)(VI-O = , f = 1 MHz) CISO0.8 pfISOLATION CHARACTERISTICSDC Characteristics Test Conditions Symbol Device Min Typ** Max Units(IF= 10 mA, VCE= 5 V)MOC8080 50 (500) H11B255 10 (100)(IF= 10 mA, VCE= 1 V)CNX48U 60 (600)Collector Output TIL113 30 (300)Current(1)IC (CTR) H11B1 5 (500) mA (%)(IF= 1 mA, VCE= 5 V) H11B2 2 (200)H11B3 1 (100)(IF= 1 mA, VCE= 1 V)CNX48U5 (500)(IF= 0.5 mA, VCE= 1 V) 1.75 (350)(IF=1 mA, IC= 1 mA)H11B1, H11B21.0H11B3, MOC8080Saturation Voltage (IF= 5 mA, IC= 10 mA) VCE(sat)CNX48U 1.0 V(IF= 50 mA, IC= 50 mA) H11B255 1.0(IF= 8 mA, IC= 2 mA) TIL113 1.25AC CharacteristicstonH11B125(IC= 10 mA, VCE= 10 V) H11B2(RL= 100 1) (Fig.7)toffH11B25518H11B3(IF= 10 mA, VCC= 5 V)ton3.5(RE= 100 1), (RBE= 1M1)toff36Switching Times(Fig. 8)µs(IF= 1 mA, VCC= 5 V)tonCNX48U70(RE= 1k1), (RBE= 10M1)toff190(Fig. 8)(IF= 5 mA, VCC= 10 V) tonMOC80803.5(RL= 100 1) (Fig.7) toff25(IF= 200 mA, IC= 50 mA)ton0.35 5(VCC= 10 V) (RL= 100 1)toffTIL11355 100(Fig.7)6/1/00 200042APHOTODARLINGTON OPTOCOUPLERSCNX48U H11B1 H11B2 H11B255 H11B3MOC8080 TIL113TRANSFER CHARACTERISTICS (TA= 25°C Unless otherwise specified.)Note** Typical values at TA= 25°C6/1/00 200042AFig. 6 Turn-Off Time vs. Input CurrentIF - LED INPUT CURRENT (mA)0.1 1 10 100 TOFF - TIME (µs)1101001000VCC = 10 V RL = 100 1 RL = 1 k1 RL = 10 1Fig. 3 Collector Current vs. Collector-Emitter Voltage VCE- COLLECTOR -EMITTER VOLTAGE (V)012345678910IC - COLLECTOR CURRENT (NORMALIZED)0246810121416 IF = 10 mA IF = 5 mA IF = 2 mA IF = 1 mANORMALIZED TO:IF = 1 mAVCE = 5 VFig. 5 Turn-On Time vs. Input CurrentIF - LED INPUT CURRENT (mA) TON - TIME (µs)0.1 1 10 1000.11101001000 RL = 100 1 RL = 1 k1 RL = 10 1VCC = 10 VTA - AMBIENT TEMPERATURE (˚C)ICEO - COLLECTOR-EMITTER DARK CURRENT (nA)Fig. 4 Dark Current vs. Ambient Temperature0 204060801000.010.1110100100010000VCE = 10 VFig. 1 Output Current vs. Input Current IF - LED INPUT CURRENT (mA)0.1 1 10 100CTR - CURRENT TRANSFER RATIO (NORMALIZED)0.11NORMALIZED TO:CTR @ IF = 10 mATA = 25˚CVCE = 5 VTA = 0˚C, 25˚CTA = 70˚CTA = 100˚CTA = -55˚CTA - AMBIENT TEMPERATURE (˚C)Fig. 2 Current Transfer Ratio vs. Ambient Temperature-80 -60 -40 -20 0 20 40 60 80 100 120CTR - CURRENT TRANSFER RATIO (NORMALIZED)0.1110NORMALIZED TO:CTR @ IF = 10 mATA = 25˚CVCE = 10 VPHOTODARLINGTON OPTOCOUPLERSCNX48U H11B1 H11B2 H11B255 H11B3MOC8080 TIL1136/1/00 200042AINPUTPULSEOUTPUTIF INPUTOUTPUT1.5 VFig. 7 Switching Time Test Circuit and Waveforms (All devices except CNX48U)5 VINPUTVCCRLRINVCCRERBEOUTPUT50190%10%ton offtINPUT90%ton10%offtFig. 8 Switching Time Test Circuit and Waveforms (CNX48U only)Test Circuit (All devices except CNX48U) Switching Waveforms (All devices except CNX48U)Test Circuit (CNX48U only) Switching Waveforms (CNX48U only)TYPICAL ELECTRO-OPTICAL CHARACTERISTIC CURVES(25°C Free air temperature unless otherwise specified) (Cont.)Notes1. The current transfer ratio(IC/IF) is the ratio of the detector collector current to the LED input current with VCE@ 10 V.2. For this test, LED pins 1 and 2 are common and phototransistor pins 4,5 and 6 are common.PHOTODARLINGTON OPTOCOUPLERSCNX48U H11B1 H11B2 H11B255 H11B3MOC8080 TIL1136/1/00 200042ALead Coplanarity : 0.004 (0.10) MAX0.270 (6.86)0.240 (6.10)0.350 (8.89)0.330 (8.38)0.300 (7.62)TYP0.405 (10.30)MAX0.315 (8.00)MIN0.016 (0.40) MIN25PIN 1ID.0.016 (0.41)0.008 (0.20)0.100 (2.54)TYP0.022 (0.56)0.016 (0.41)0.070 (1.78)0.045 (1.14)0.200 (5.08)0.165 (4.18)430.020 (0.51)MIN160.100 (2.54)TYP0.020 (0.51)MIN0.350 (8.89)0.330 (8.38)0.270 (6.86)0.240 (6.10)PIN 1ID.0.022 (0.56)0.016 (0.41)0.070 (1.78)0.045 (1.14)0.200 (5.08)0.115 (2.92)0.300 (7.62)TYP0° to 15°0.154 (3.90)0.100 (2.54)SEATING PLANE0.016 (0.40)0.008 (0.20)SEATING


View Full Document

USC EE 459Lx - H11B2

Download H11B2
Our administrator received your request to download this document. We will send you the file to your email shortly.
Loading Unlocking...
Login

Join to view H11B2 and access 3M+ class-specific study document.

or
We will never post anything without your permission.
Don't have an account?
Sign Up

Join to view H11B2 2 2 and access 3M+ class-specific study document.

or

By creating an account you agree to our Privacy Policy and Terms Of Use

Already a member?