© 2000 Fairchild Semiconductor Corporation DS006380 www.fairchildsemi.comAugust 1986Revised March 2000DM74LS86 Quad 2-Input Exclusive-OR GateDM74LS86Quad 2-Input Exclusive-OR GateGeneral DescriptionThis device contains four independent gates each of whichperforms the logic exclusive-OR function. Ordering Code:Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.Connection Diagram Function TableY = A ⊕ B = A B + ABH = HIGH Logic LevelL = LOW Logic LevelOrder Number Package Number Package DescriptionDM74LS86M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 NarrowDM74LS86SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm WideDM74LS86N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 WideInputs OutputABYLLLLHHHLHHHLwww.fairchildsemi.com 2DM74LS86Absolute Maximum Ratings(Note 1)Note 1: The “Absolute Maximum Ratings” are those values beyond whichthe safety of the device cannot be guaranteed. The device should not beoperated at these limits. The parametric values defined in the ElectricalCharacteristics tables are not guaranteed at the absolute maximum ratings.The “Recommended Operating Conditions” table will define the conditionsfor actual device operation.Recommended Operating ConditionsElectrical Characteristics over recommended operating free air temperature range (unless otherwise noted)Note 2: All typicals are at VCC = 5V, TA = 25°C.Note 3: Not more than one output should be shorted at a time, and the duration should not exceed one second.Note 4: ICCH is measured with all outputs OPEN, one input at each gate at 4.5V, and the other inputs grounded.Note 5: ICCL is measured with all outputs OPEN and all inputs grounded.Switching Characteristics at VCC = 5V and TA = 25°C Supply Voltage 7VInput Voltage 7VOperating Free Air Temperature Range 0°C to +70°CStorage Temperature Range −65°C to +150°CSymbol Parameter Min Nom Max UnitsVCCSupply Voltage 4.75 5 5.25 VVIHHIGH Level Input Voltage 2 VVILLOW Level Input Voltage 0.8 VIOHHIGH Level Output Current −0.4 mAIOLLOW Level Output Current 8 mATAFree Air Operating Temperature 0 70 °CSymbol Parameter Conditions MinTypMax Units(Note 2)VIInput Clamp Voltage VCC = Min, II = −18 mA −1.5 VVOHHIGH Level VCC = Min, IOH = Max,2.7 3.4 VOutput Voltage VIL = Max, VIH = MinVOLLOW Level VCC = Min, IOL = Max,0.35 0.5Output Voltage VIL = Max, VIH = Min VIOL = 4 mA, VCC = Min 0.25 0.4IIInput Current @ Max Input Voltage VCC = Max, VI = 7V 0.2 mAIIHHIGH Level Input Current VCC = Max, VI = 2.7V 40 µAIILLOW Level Input Current VCC = Max, VI = 0.4V −0.6 mAIOSShort Circuit Output Current VCC = Max (Note 3) −20 −100 mAICCHSupply Current with Outputs HIGH VCC = Max (Note 4) 6.1 10 mAICCLSupply Current with Outputs LOW VCC = Max (Note 5) 9 15 mARL = 2 kΩSymbol Parameter ConditionsCL = 15 pF CL = 50 pFUnitsMin Max Min MaxtPLHPropagation Delay Time Other18 23 nsLOW-to-HIGH Level Output InputtPHLPropagation Delay Time Low17 21 nsHIGH-to-LOW Level OutputtPLHPropagation Delay Time Other10 15 nsLOW-to-HIGH Level Output InputtPHLPropagation Delay Time High12 15 nsHIGH-to-LOW Level Output3 www.fairchildsemi.comDM74LS86Physical Dimensions inches (millimeters) unless otherwise noted14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 NarrowPackage Number M14Awww.fairchildsemi.com 4DM74LS86Physical Dimensions inches (millimeters) unless otherwise noted (Continued)14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm WidePackage Number M14D5 www.fairchildsemi.comDM74LS86 Quad 2-Input Exclusive-OR GatePhysical Dimensions inches (millimeters) unless otherwise noted (Continued)14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 WidePackage Number N14AFairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied andFairchild reserves the right at any time without notice to change said circuitry and specifications.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILDSEMICONDUCTOR CORPORATION. As used herein:1. Life support devices or systems are devices or systemswhich, (a) are intended for surgical implant into thebody, or (b) support or sustain life, and (c) whose failureto perform when properly used in accordance withinstructions for use provided in the labeling, can be rea-sonably expected to result in a significant injury to theuser.2. A critical component in any component of a life supportdevice or system whose failure to perform can be rea-sonably expected to cause the failure of the life supportdevice or system, or to affect its safety or
View Full Document
Unlocking...