Main MenuBackSearchfairchildsemi.com© 2000 Fairchild Semiconductor Corporation DS006348 www.fairchildsemi.comAugust 1986Revised March 2000DM74LS09 Quad 2-Input AND Gates with Open-Collector OutputsDM74LS09Quad 2-Input AND Gates with Open-Collector OutputsGeneral DescriptionThis device contains four independent gates each of whichperforms the logic AND function. The open-collector out-puts require external pull-up resistors for proper logicaloperation.Pull-Up Resistor EquationsWhere: N1 (IOH) = total maximum output high currentfor all outputs tied to pull-up resistor N2 (IIH) = total maximum input high current forall inputs tied to pull-up resistorN3 (IIL) = total maximum input low current forall inputs tied to pull-up resistor Ordering Code:Devices also available in Tape and Reel.Connection Diagram Function TableY = ABH = HIGH Logic LevelL = LOW Logic LevelOrder Number Package Number Package DescriptionDM74LS09M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 NarrowDM74LS09N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 WideInputs OutputABYLLLLHLHLLHHHwww.fairchildsemi.com 2DM74LS09Absolute Maximum Ratings(Note 1)Note 1: The “Absolute Maximum Ratings” are those values beyond whichthe safety of the device cannot be guaranteed. The device should not beoperated at these limits. The parametric values defined in the ElectricalCharacteristics tables are not guaranteed at the absolute maximum ratings.The “Recommended Operating Conditions” table will define the conditionsfor actual device operation.Recommended Operating ConditionsElectrical Characteristics over recommended operating free air temperature range (unless otherwise noted)Note 2: All typicals are at VCC = 5V, TA = 25°C.Switching Characteristics at VCC = 5V and TA = 25°C Supply Voltage 7VInput Voltage 7VOutput Voltage 7VOperating Free Air Temperature Range 0°C to +70°CStorage Temperature Range −65°C to +150°CSymbol Parameter Min Nom Max UnitsVCCSupply Voltage 4.75 5 5.25 VVIHHIGH Level Input Voltage 2 VVILLOW Level Input Voltage 0.8 VVOHHIGH Level Output Voltage 5.5 VIOLLOW Level Output Current 8 mATAFree Air Operating Temperature 0 70 °CSymbol Parameter Conditions MinTypMax Units(Note 2)VIInput Clamp Voltage VCC = Min, II = −18 mA −1.5 VICEXHIGH Level VCC = Min, VO = 5.5V100 µAOutput Current VIH = MinVOLLOW Level VCC = Min, IOL = Max0.35 0.5Output Voltage VIL = Max VIOL = 4 mA, VCC = Min 0.25 0.4IIInput Current @ Max Input Voltage VCC = Max, VI = 7V 0.1 mAIIHHIGH Level Input Current VCC = Max, VI = 2.7V 20 µAIILLOW Level Input Current VCC = Max, VI = 0.4V −0.36 mAICCHSupply Current with Outputs HIGH VCC = Max 2.4 4.8 mAICCLSupply Current with Outputs LOW VCC = Max 4.4 8.8 mARL = 2 kΩSymbol Parameter CL = 15 pF CL = 50 pF UnitsMinMaxMinMaxtPLHPropagation Delay Time5 20 8 45 nsLOW-to-HIGH Level OutputtPHLPropagation Delay Time4 15 6 27 nsHIGH-to-LOW Level Output3 www.fairchildsemi.comDM74LS09Physical Dimensions inches (millimeters) unless otherwise noted14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 NarrowPackage Number M14Awww.fairchildsemi.com 4DM74LS09 Quad 2-Input AND Gates with Open-Collector OutputsPhysical Dimensions inches (millimeters) unless otherwise noted (Continued)14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 WidePackage Number N14AFairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied andFairchild reserves the right at any time without notice to change said circuitry and specifications.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILDSEMICONDUCTOR CORPORATION. As used herein:1. Life support devices or systems are devices or systemswhich, (a) are intended for surgical implant into thebody, or (b) support or sustain life, and (c) whose failureto perform when properly used in accordance withinstructions for use provided in the labeling, can be rea-sonably expected to result in a significant injury to theuser.2. A critical component in any component of a life supportdevice or system whose failure to perform can be rea-sonably expected to cause the failure of the life supportdevice or system, or to affect its safety or
View Full Document
Unlocking...