Exercise #3: Programming the BaSYS BoardRevised 10_6_10Section:Exercise #3: Programming the BaSYS BoardRevised 10_6_10I am submitting my own work, and I am aware of the penalties for cheating that may be assessed if I submit work that is not my own.___________________________ _____________Sign Name DatePrint Name:ID#: Section:For lab assistant use : I observed the student designing, implementing, and demonstrating the circuits and/or other work for this lab, or the student demonstrated adequate knowledge of their submitted work (otherwise, circle “no demo” and deduct points as appropriate).This lab was (circle one) circle ifOverall score (do not deduct late points):ON TIME LATE (-20%) NO DEMOLab assistant signature Date TimeMake certain to use the lab manual for this lab, to clarify directions.In LabGiven the four functions in the lab manual, answer the following questions.Two __________________Three __________________Twelve __________________Win __________________Create truth table for A, B, C,DSources WindowCapture a screenshot that clearly shows the sources/implementation window after you have synthesized your schematic. Make certain to expand any condensed folders (any + symbols in the list of associated files). You can create a PrntScrn shot, copy it to paint and then copy the portion of the shot that is the sources window. Make certain the window contents are easily readable in the screenshot.Capture a screenshot of the full circuit (all four functions clearly shown. Use several screenshots if necessary. Close the sources and processes windows if necessary to create a bigger view. Make certain to show the tab that indicated the name of the file that is shown in your screenshot.Behavioral Simulation ModelAfter you have created a simulation source for the schematic of the four functions, capture a screenshot that clearly shows the behavioral simulation window.. You can create a PrntScrn shot,copy it to paint and then copy the portion of the shot that is the sources window. Make certain the window contents are easily readable in the screenshot.Capture a screenshot of the full behavioral source (the model that you created) after you have initialized the inputs. Close the sources and processes windows if necessary to make a large view. Make certain to show the tab that indicated the name of the file that is shown.SimulationCapture a screenshot of the full simulation (the model that you created). Make certain to show the tab that indicated the name of the file that is shown. Your model must show all possible cases for the functions’ inputs.expected Observed expected Observed expected Observed expected Observedvalue LED3 LED3 LED2 LED2 LED1 LED1 LED0 LED00 ON OFF ON OFF 1 OFF ON ON OFF 2 ON OFF ON OFF 3 OFF ON ON OFF 4 ON OFF OFF ON 5 OFF ON ON OFF 6 ON OFF OFF ON 7 ON OFF ON OFF Total hours reported for this lab portion: ________________TA Checkoff Signature __________________________________________Student Evaluation:What did you like most about this lab?What would you change about this lab to make it better (not necessarily easier)?Write down each time the software crashes? Did you find the reason why it crashed? Did you find a