EECS 100 RC Circuits EE 100 Lab 3 Experiment Report RC Circuits Name Name TA Section This write up follows along with the Hands On section of the lab You should complete this report as you do the lab exercises 1 Are you able to measure the value of the resistor If not explain the reason why you cannot make the measurement Explain how the DMM works 2 Explain how you got your ohmmeter reading for the circuit in Figure 4 Why does it take some time before the ohmmeter s reading stabilizes 3 Can you determine the RC circuit configuration series or parallel using an ohmmeter If so how 4 Which box contains a series RC circuit Which box contains a parallel RC circuit 1 EECS 100 RC Circuits Series RC Circuit Black Box 5 What is the time constant 1 Also measure and record RX1 6 What is the time constant 2 Also measure and record RX2 7 Find the resistance and capacitance RB and CB Ask your TA for the resistance and capacitance of the resistor and the capacitor inside the black box Are they in good agreement with the values you have obtained experimentally Explain any significant difference s Parallel RC Circuit Black Box 8 What is the value of the resistor RB inside the black box 9 What is the time constant of the circuit with RX What is the value of the capacitor inside the black box Ask your TA for the values of the resistor and the capacitor inside the black box Are they in good agreement with the values you have obtained experimentally Explain any significant difference s 2
View Full Document
Unlocking...