Slide 1Slide 2Slide 3Slide 4Slide 5Slide 6Slide 7Slide 8Slide 9Slide 10Slide 11Slide 12Slide 13Slide 14Supercritical Fluid Chromatography1. What is supercritical fluid2. Supercritical Fluid Extraction 3. Supercritical fluid chromatography (SFC)4. Theory of SFC5. Instrumentation6. ApplicationsSupercritical Fluid Chromatography1. What is supercritical fluidSupercritical fluid is a state of matter that is intermediate between a gas and liquid in its properties. This state formed when a gas or liquid solvent is subjected to temperature and pressure condition exceeding a particular critical point. The temperatureand pressure at which this pint Occurs are known as the Critical temperature and Critical pressure and areCharacteristic of the solvent.Beyond this point, the solventWill be neither a gas or liquid,but will possess propertiesof both phases . Whether this supercritical fluid acts more likea gas or liquid will depend onthe pressure and temperature2. Supercritical Fluid Extraction There are several advantages of supercritical fluid extraction (SFE):a. SFE is generally fast. The rate of mass transfer between a sample matrix and an extraction fluid is determined by the rate of diffusion of a species in the fluid and the viscosity of the fluid—the greater the diffusion rate and the lower the viscosity, the greater will be the rate of mass transfer.b. The solvent strength of a supercritical fluid can be varied by changes in the pressure and to a less extent in the temperature. c. Many supercritical fluids are gases at ambient condition.d. Some supercritical fluid are cheap, inert, and nontoxic.3. Supercritical fluid chromatography (SFC)a. SFC is a chromatographic technique in which the mobile phase is a supercritical fluid.b. The use of a supercritical fluid mobile phase in chromatography was first proposed in 1958 by J. Lovelock. The first actual report use of this in a chromatographic system was in 1962 by Klesper et al, who used it to separate thermally-labile porphyrins.c. SFC is of importance because it permits the separation and determination of a group of compounds that are not conveniently handled by either GC or LC. These compounds (1) are either non-volatile or thermally labile so that the GC are in-applicable, and (2) contain no functional groups that make impossible detection by spectroscopic or electrochemical techniques employed in LC.4. Theory of SFCSince supercritical fluids have properties between those of gases and liquid, their use as a mobile phase offers several advantages. Typical physical properties of liquid, gases and supercritical fluids are shown below:a. One of advantages is that supercritical fluid have lower densities and viscosities than liquids. This results in larger diffusion coefficients for solutes is SFCthan LC. This results in Better efficiencies and higher optimum linear Velocities in SFC than LC. The plate height of a SFC System is given by the van Deemter equation.H = A + B/u + CuPhase density Diffusion coefficient ViscosityGas 10-3 10-1 10-4SL 0.3-0.9 10-3 ~10-4 10-3 ~10-4Liquid 1 <10-5 10-2b. SFs have higher densities than gas, so that mobile phase has a greater chance of interacting with the solute than that in GC (i.e., carrier gas). This makes the mobile phase important in determining the retention of solutes on the system and give more flexibility in optimizing the separation. For example, retention of solutes in SFC can be changed by using a different column (i.e. different stationary phases) as in GC, or by changing the mobile phase strength as in LC.isobaric Pressure programmingFlow-rate programmingc. One major advantage of SFC is its ability to use detector available for either GC or LC, such as FID, UV-Vis, and Fluorescence detectors. This gives it a wide range of both universal and selective detections for use in either analytical or preparative-scale work.LC detectors: Thermal conductivity detector (TCD): 10-7 M (103-fold range)Flame Ionization detector (FID): 10-10 M (a 105-fold range)Nitrogen-phosporus detector (NPD): 10-10 M (a 106-fold range)Electron capture detector (ECD): 10-14 ~ 10-16 M (a 103- 104 fold range)Flame photometric detector(FPD):10-14 M (P, S)Electrochemical detector (S, halogen,nitrogen-) Refractive Index Detector(10-5 to 10-6 M)Absorption Detector (UV/Vis)(10-8 M)Fluorescence Detector(10-10 M)Conductivity Detector(10-6 M)Electrochemical Detector(10-11 M)GC detectors:d. Depending on which supercritical fluid is used, it is also possible to use SFC at lower T than GC. This makes it more useful in the separation of thermally unstable compounds. e. The stationary phases used in SFC can be similar to those in LC as well as GC. Either packed or open-tubular columns may be used.Because of these advantages, SFC is commonly viewed as a technique which is complementary to both LC and GC. 5. Instrumentationa. Instrumentation for SFC can be obtained commercially or adapting system used for either LC and GC.b. The main difference of a SFC than a LC or GC system is the need to control bother temperature and pressure of mobile phase. This must be doneto keep the mobile phase as aSupercritical fluid. Control of the pressure (density) of the supercritical fluid can also used to vary strength of mobile phase during the gradient elution in SFC .6. ApplicationsBy now, SFC has been applied to a wide variety of materials, includingNatural products, drug, foods, pesticides and herbicides, surfactants polymers, and polymer additives, fossil fuels, and explosives and Propellants.Dimethylpolysiloxane: non-volatile andspecial function groupsSupercritical Fluid Chromatography1. What is supercritical fluid2. Supercritical Fluid Extraction 3. Supercritical fluid chromatography (SFC)4. Theory of SFC5. Instrumentation6.