Parts List and Part BalloonsContentsParts List InformationAdding Information to a Part FileAdding the Material for the PartThe Assembly file and drawing filePlacing the Parts ListSetting up the Part ListParts List SettingsSlide 10Inserting the BalloonsBalloons AdjustmentsFinished Exploded Assembly View with Part’s List and Balloons1SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of TechnologyParts List and Part Balloons2SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of TechnologyContentsA Parts List (Bill of Materials) (BOM) is located on an assembly drawing and provides a list and information about the individual parts in the assembly.A Parts List usually contains the item key, quantity, part name, and material as well as other related information required by the company.Balloons are added to the parts of the assembly to match the part’s item key in the Parts List.Reference dimensions may be added to the assembly drawing for further communication.3SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of Technology Parts List InformationThe information for each column in the Parts List is acquired from the I - Iproperties dialog box from each individual Part file.4SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of TechnologyAdding Information to a Part FileOpen the end.ipt fileOpen the Iproperties dialog box5SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of TechnologyAdding the Material for the Part6SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of TechnologyThe Assembly file and drawing file7SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of TechnologyPlacing the Parts List Click on the Parts List icon8SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of TechnologySetting up the Part ListSelect the Drawing View for the Part list to be placed. Then select OK9SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of TechnologyParts List SettingsDrag the Parts list box in and place in corner.Double click on the box to make settings in the dialog box so the Parts List includes the necessary information and is formatted correctly.10SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of TechnologyParts List SettingsMake settings in the dialog box so the Parts List includes the necessary information and is formatted correctly.Select Apply.Click OK button to exit.11SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of TechnologyInserting the Balloons12SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of TechnologyBalloons AdjustmentsSelect placement of the Part Balloons and then reposition as required.Select the exploded view and then select the parts with a window.13SheetCourse: Introduction to Engineering Graphics and Visualizationcopyright 2010, Georgia Institute of TechnologyFinished Exploded Assembly View with Part’s List and
View Full Document