METBD 110 Aug-Sept TENTATIVE OUTLINE All reading assignments MUST be completed BEFORE class meets! Appropriate web pages and PowerPoint files MUST be downloaded BEFORE class meets! Updated Week of Tuesday (2 hours) Thursday (2 hours) Friday (1 hour) 8/26 Introduction Download Introduction Transparencies & Introduction to CAD PowerPoint files Readings: MGC Chapter 1, GSP Chapter 1. In class: • Hands-On 1 (1A due in class; 1B due next class) • Self-grower assessment survey Sketching and Lettering Orthographic Projection Download Sketching and Orthographic PowerPoint Files (print before class starts) Readings: (Read BEFORE class starts) Syllabus and Chapter MGC 3.1-3.12, 5.1-5.7. In class: • Practice quiz • Quiz 1 on readings 1.15 - 1.16 & 3.1 - 3.12 (notes may be used) • Quiz 2 on readings 5.1-5.7 (notes may be used) • Hands-On 2 (print web pages before this class starts) Reading a Technical Text Book Readings: Dimensioning Module: Lesson 1. In class: • Quiz 3 on dimensioning module - lesson 1(NO notes) • Reading log exercise 9/2 Syllabus Orthographic Projection Readings: Syllabus, MGC 5.8-5.10 In class: • Quiz 4 on syllabus - except for Knowledge Table (hand written notes may be used) • Quiz 5 on reading (notes may be used) • Finish Hands-On 2 • Hands-On 3 Orthographic Projection cont'd Dimensioning Readings: MGC 9.1-9.14, Dimensioning Module Lessons 2 In class: • Quiz 6 on hidden lines (NO notes) • Dimension Ortho_01 & 02 - due next class • Finish Hands-On 3 • Hands-On 4 - due next class with dimensions Orthographic Projection cont'd, Dimensioning In class: • Quiz 7 on dimensioning • Finish Hands-On 4 • Hands-On 5 - individual homework assignment due next class 9/9 Orthographic Projection, Dimensioning Angles Readings: GMC 5.11-5.26, 5.31, 9.15 In class: • Quiz xx on readings (notes may be used) • Hands-On 6 - due in class • Hands-On 7 Orthographic Projection, Center lines, Dimensioning Cylinders, Arcs, etc. Readings: GMC 5.32-5.38, 9.18-9.27 (check) In class: • Quiz xx on dimensioning prismatic features (NO notes) • Quiz 7 on readings (notes may be used) • Hands-On 8 - individual assignment - due next class Orthographic Projection In class: • Quiz 8 on center lines (NO notes) • Hands-On 9 – due next class9/16 Orthographic Projection Readings: GMC 5.39-5.55 In class: • Quiz 9 on orthographic readings (notes may be used) • Hands-On 10 • Activity 1 - GRADED - individual assignment - sketch LIGHTLY for next class Orthographic Projection In class: • Hands-On 11 • Activity 1 - darken due first class next week. Isometric Download Isometric PowerPoint file before class starts Readings: Chapter 6.1 - 6.7, 6.12, 6.14 - 6.16 In class: • Quiz 10 on isometric readings (notes may be used) Activity 10 - due as much as you can (lightly) for the next class 9/23 Isometrics: Readings: Chapter 6.8 - 6.21 In class: • Quiz 11 on orthographic projection (NO notes) • Quiz 12 on readings (notes may be used) • Activity 11 - due lightly for next class Isometrics: In class: • Activity 9 - corrected and darkened for Friday • Activity 10 - correct in class and darken for Friday • Activity 11 - correct in class and darken for Friday • Activity 12 - 12B will be GRADED - due next Tuesday. Review for Exam 1 9/30 Solid Modeling / Sketcher: Sketcher Tools, Constraints, Trim/Extend, Drag, Preferences Readings: Pro/E Sketcher In Class: • Activity 13 - matching left column to right column due next class • Activity 14 - due next class Sketcher cont'd. In Class: • Quiz 13 - Isometrics - in class • Finish Activity 13 - due next class. • HW sketch problem 5.14, 5.15, 5.16 (Leave holes and slots out of 5.14 and 5.15, but sketch all of 5.16.) Penn State Erie, The Behrend College School of Engineering and Engineering