Chapter 5Review Hidden LinesSurface IdentificationView IdentificationConfiguration RuleSlide 6Slide 7Slide 8Points, Lines & PlanesExerciseChapter 5MultiviewSketching & ProjectionPart 3Print handoutsSelect File, PrintEdit the following selections to read:Select the OK button2Review Hidden Lines3Surface Identification4View Identification5Configuration RuleNORMAL SURFACEPlane is shown true shape and size. In other words, parallel to one of the principal planes.TSEDGEEDGESURFACE B6Configuration RuleEDGEEDGEINCLINDED SURFACESurface is perpendicular to one plane and will show as an edge on that plane.And the surface is tipped, or inclined, to adjacent planes. The surfaces in these views are foreshortened.7Configuration RuleOBLIQUE PLANE? PLANEEDGENORMAL PLANEEDGEEDGETSSurface is not parallel or perpendicular to any principal plane.8Configuration RuleIs this one correct?? PLANE9Points, Lines & PlanesIf all else fails, –Break the object down to simpler shapes–Locate the height, width and depth of each
View Full Document