Module 15: Network StructuresTopologyPowerPoint PresentationSlide 4Slide 5Slide 6Network TypesNetwork Types (Cont.)CommunicationNaming and Name ResolutionRouting StrategiesRouting Strategies (Cont.)Connection StrategiesContentionContention (Cont.)Slide 16ISO OSI Network ModelDesign Strategies (Cont.)Slide 19Slide 20Slide 21Slide 221Module 15: Network StructuresModule 15: Network StructuresTopologyNetwork TypesCommunication2TopologyTopologySites in the system can be physically connected in a variety of waysIssuesBasic cost. How expensive is it to link the various sites in the system?Communication cost. How long does it take to send a message from site A to site B?Reliability. If a link or a site in the system fails, can the remaining sites still communicate with each other?The following six items depict various network topologies.3•Fully connected network •Partially connected network4Tree-structured networkStar network5Ring networks: (a) Single links. (b) Double links6Bus network: (a) Linear bus. (b) Ring bus.7Network TypesNetwork TypesLocal-Area Network (LAN) – designed to cover small geographical area.Multiaccess bus, ring, or star network.Speed 100-1000 megabits/second.Broadcast is fast and cheap.8Network Types (Cont.)Network Types (Cont.)Wide-Area Network (WAN) – links geographically separated sites. Point-to-point connections over long-haul lines (often leased from a phone company).Speeds of 1 Mbps to 100Mbps.Broadcast usually requires multiple messages.9CommunicationCommunicationNaming and name resolution: How do two processes locate each other to communicate?Routing strategies. How are messages sent through the network?Connection strategies. How do two processes send a sequence of messages?Contention. The network is a shared resource, so how do we resolve conflicting demands for its use?The design of a communication network must address four basic issues:10Naming and Name ResolutionNaming and Name ResolutionName systems in the networkAddress messages with the process-id.Identify processes on remote systems by <host-name, identifier> pair.Domain name service (DNS) – specifies the naming structure of the hosts, as well as name to address resolution (Internet).11Routing StrategiesRouting StrategiesFixed routing. A path from A to B is specified in advance; path changes only if hardware fails. Shortest path communication costs are minimized.Fixed routing cannot adapt to load changes.Fixed routing messages delivered in the order in which they were sent.Virtual circuit. A path from A to B is established and fixed for the duration of each session. Partial remedy to adapting to load changes.Also ensures that messages will be delivered in the order in which they were sent.12Routing Strategies (Cont.)Routing Strategies (Cont.)Dynamic routing. The path used to send a message form site A to site B is chosen only when a message is sent. Usually a site sends a message to another site on the link least used at that particular time.Adapts to load changes by avoiding routing messages on heavily used path.Avoids failed hardware robustness and reliabilityMessages may arrive out of order. This problem can be typically solved by appending a sequence number to each message.13Connection StrategiesConnection StrategiesCircuit switching. A permanent physical link is established for the duration of the communication (i.e., telephone system). Message switching. A temporary link is established for the duration of one message transfer (i.e., post-office mailing system). Packet switching. Messages of variable length are divided into fixed-length packets which are sent to the destination. Each packet may take a different path through the network. The packets must be reassembled into messages as they arrive.Circuit switching requires setup time, but incurs less overhead for shipping each message, and may waste network bandwidth. Message and packet switching require less setup time, but incur more overhead per message. HARDWARE?14ContentionContentionCSMA/CD. Carrier sense with multiple access (CSMA); collision detection (CD)A site determines whether another message is currently being transmitted over that link. If two or more sites begin transmitting at exactly the same time, then they will register a CD and will stop transmitting. When the system is very busy, many collisions may occur, and thus performance may be degraded.SCMA/CD is used successfully in the Ethernet system, the most common network system.Several sites may want to transmit information over a link simultaneously. Techniques to avoid repeated collisions include:15Contention (Cont.)Contention (Cont.)Token passing. A unique message type, known as a token, continuously circulates in the system (usually a ring structure). A site that wants to transmit information must wait until the token arrives. When the site completes its round of message passing, it retransmits the token. A token-passing scheme is used by the IBM and Apollo systems. Message slots. A number of fixed-length message slots continuously circulate in the system (usually a ring structure). Since a slot can contain only fixed-sized messages, a single logical message may have to be broken down into a number of smaller packets, each of which is sent in a separate slot. This scheme has been adopted in the experimental Cambridge Digital Communication Ring16ISO OSI Network ModelISO OSI Network Model17ISO OSI Network ModelISO OSI Network ModelPhysical layer – handles the mechanical and electrical details of the physical transmission of a bit stream.Data-link layer – handles the frames, or fixed-length parts of packets, including any error detection and recovery that occurred in the physical layer.Network layer – provides connections and routes packets in the communication network, including handling the address of outgoing packets, decoding the address of incoming packets, and maintaining routing information for proper response to changing load levels.The communication network is partitioned into the following multiple layers;18Design Strategies (Cont.)Design Strategies (Cont.)Transport layer – responsible for low-level network access and for message transfer between clients, including partitioning messages into packets, maintaining packet order, controlling
View Full Document
Unlocking...