Instructions and Grading for CFD Lab Report57:020 Mechanics of Fluids and Transport ProcessesInstructions and Grading for CFD Lab ReportSection PointsPreLab Questions Submitted before PreLab 101 Title Page 5 1.1 Course Name 1.2 Title of report 1.3 Submitted to “Instructor’s name” 1.4 Your name (with University ID and email address) 1.5 Your affiliation (Department, Group) 1.6 Date2 Test and Simulation Design 10 Purpose of CFD simulation 3 CFD Process 10 Describe in your own words how you implemented CFD process (Hint: CFD process block diagram)4 Data Analysis and Discussion 50 Answer questions given in Exercise Notes of the CFD lab handouts5 Conclusions 15 Conclusions regarding achieving purpose of the simulation Describe what you learned from CFD Lab. Comments on the “hands-on” experience, software interface, and lab performance Suggestions and improvements Total 100Additional Instructions:1. Each student is required to hand in individual lab report and PreLab questions.2. Conventions for graphical presentation: * CFD figures should be plotted using symbols without X and Y grid * All figures in the report should be either the hardcopies of FlowLab or the plots using other commercial software (Excel). * Color print of figures recommended but not required 3. Reports will not be graded unless section 1 is included and complete 4. CFD Lab report template is provided to facilitate you to write reports. 1CFD Process Block Diagram2Viscous ModelBoundary ConditionsInitial ConditionsConvergent LimitContoursPrecisions(single/double)Numerical SchemeVectorsStreamlinesVerificationGeometrySelect GeometryGeometry ParametersPhysics Mesh Solve Post-ProcessingCompressibleON/OFFFlow propertiesUnstructured(automatic/manual)Steady/UnsteadyForces Report(lift/drag, shear stress, etc)XY PlotDomain Shape and SizeHeat Transfer
View Full Document
Unlocking...