ECEN 215 – PRIN OF ELECTRICAL ENGRFall 2018Lab 8: Introduction to Logic GatesECEN 215 – PRIN OF ELECTRICAL ENGRFall 2018 Lab 8: Introduction to Logic GatesSubmitted by:Student Name UIN: Section # Group # 512 Date Performed: Nov 12th , 2018I. ObjectiveThe objective of this lab was to understand how AND and OR gates operate. II. Procedure1. The circuit was constructed.2. The chip was supplied with a 5V power source.3. The inputs and outputs of the AND 7408 gate were tested.4. A basic 2-input truth table was filled in.5. The second circuit was constructed with a 5V power source as well.6. The inputs and outputs of the OR 7432 gate were tested.7. A basic 2-input truth table was filled in. 8. A more complex circuit was constructed with a 5V input and a truth table was also filled out. III. Difficulties1. There were no difficulties encountered in this lab.IV. ResultsTable 1: Basic 2-Input Truth Table for AND (7408) gateA B Vout0 0 00 1 01 0 01 1 1Table 2: Basic 2-Input Truth Table for OR (7432) gateA B Vout0 0 00 1 11 0 11 1 1 Table 3: Truth Table A(V)B(V)C(V)Vout (V)0 0 0 00 0 5 00 5 0 00 5 5 55 0 0 05 0 5 55 5 0 55 5 5 5V. Conclusion From the experiments, we can conclude that the predictions made within the prelab were correct whensimulated in the
View Full Document