Chapter 5 - Transport and Network Layers TCP/IP (Part 1) Dr. V.T. Raja Oregon State UniversityExamples of Transport/Network Layer ProtocolsTCPSlide 4TCP (Continued)Port IdentifiersSlide 7Internet Protocol (IP)IP (Continued)Slide 10IPv4 Addressing ICANNIPv4 Addressing Dotted Decimal NotationIPv4 Addressing Class Based Address StructureIPv4 Addressing Network and Host AddressesIPv4 Addressing (Continued) SubnetsIPv4 Addressing Subnet MasksSubnet mask applications (Continued) Determining if sender and receiver are on same subnetSubnets (Continued) Partial SubnettingSubnet Mask Applications (Continued)Number of Subnets and Number of Computers Per Subnet Class C AddressesClass Participation Exercise # 2 – Question # 5Chapter 5 - Transport and Network Layers TCP/IP (Part 1) Dr. V.T. RajaOregon State UniversityChapter Objectives:•Understand primary functions of transport and network layers •Understand the “big picture” –Five-layer network modelExamples of Transport/Network Layer Protocols•Examples:–Two Popular transport/network layer protocols–Example of transport/network layer protocol not used much in North America–Protocol for IBM compatible hardware/software and mainframe environments•Why TCP/IP?•What is the expansion of TCP/IP?•What are the major functions of TCP/IP?TCP•Main functions of TCP: Packetizing–What is packetizing?•At sender•At final destinationTCP•Thought Questions (with regard to the “big picture”):–With what layer(s) does TCP interface in the 5-layer model?–If more than two computers are involved in message transmission, then is TCP involved in all the computers? In how many computers is TCP involved?TCP (Continued)•Some details on TCP header:–TCP header containing 24 bytes (192-bit header) of overhead information is enclosed along with user’s data:•Examples of overhead information added:–Source and destination address –Packet sequence number•Thought Question (with regard to the “big picture”):–Didn’t the data link layer already have the source and destination address specified in the DLH? Is TCP duplicating this function of DL?Port Identifiers•Source Port IDs refer to software used at application layer of source computer•Destination Port IDs refer to software to be used at application layer of final destination computer •With TCP/IP, each application layer software has a unique port address/identifier. •Every standard application layer software on the Internet has a predefined (default) port number.Port Identifiers•Thought Questions: –Could network managers choose not to use the default port numbers? –Why would a network manager not want to use a default port number?Internet Protocol (IP)•What are IP’s main functions? –Main functions:•Thought Question: –Is IP involved only at sender’s or final destination computers? Or is it involved in all interim computers that take part in the message routing as well?IP (Continued)•Different versions of IP–IPv4 and IPv6•IP creates a IP header –IP header contains (among other overhead information) source and destination address!•Network layer (IP) address–Examples?IP (Continued)•Thought Question (with regard to the “big picture”):–In what order are the different headers combined with the user data packet?–If DL protocol is Ethernet, and NL protocol is TCP/IP, then what is the maximum packet size for user data? Assume DLH and DLT sizes sum to 26 bytes, TCP header size is 24 bytes, and IP header size is 24 bytes as well. –Sample content in each header?IPv4 AddressingICANN•Every computer participating on the Internet should use approved network layer (IP) addresses. •IP Addresses are approved by ICANN or one of several private companies authorized by ICANN–Internet Corporation for Assigned Names and Numbers– http://www.icann.org/–FAQ on registration of IP addresses –http://www.internic.net/faqs/IPv4 AddressingDotted Decimal Notation•Dotted Decimal Notation–Four bytes (8 bits = 1 byte) per address–Each byte separated by a dot–Each byte expressed in decimal notation•Example: –Dotted Decimal Notation: 192.16.224.254–Binary Notation?: –What is the minimum decimal value any byte can be assigned?–What is the maximum decimal value any byte can be assigned?IPv4 AddressingClass Based Address Structure•IP Addresses were grouped into classes:–Classes A, B, C, D and E–Classes A, B and C - used for commercial purposes•The class of the address - determined by examining the first byte of the address and mapping it to a range of values as follows:–Class A: first byte is in the range 1 – 127–Class B: first byte is in the range 128 - 191–Class C: first byte is in the range 192 - 223IPv4 AddressingNetwork and Host Addresses•Each IP address has two parts:–Network Address (assigned/approved by ICANN)–Host Address (assigned by host organization)•For a Class A IP address, the first byte is assigned/approved by ICANN –Class A: Network.Host.Host.Host•For a Class B IP address, the first two bytes are assigned/approved by ICANN –Class B: Network.Network.Host.Host•For a Class C IP address, the first three bytes are assigned/approved by ICANN –Class C: Network.Network.Network.Host •Restrictions for Host address: IP address cannot end in 0 or 255IPv4 Addressing (Continued)Subnets•Subnets–Part of a network that is logically grouped by IP addresses–Example: •Suppose ICANN assigned OSU a set of IP addresses as follows: 128.193.x.x•OSU assigns the host part of the IP address –128.193.75.x; (CS subnet)–128.193.76.x; (BSG subnet) –128.193.76.x; (COB subnets)•Can have one subnet for faculty: 128.193.76.____ (faculty subnet)•Can have one subnet for IS staff: 128.193.76.____ (IS staff subnet) –Every computer in a TCP/IP network is assigned a subnet mask by the host organization – Why?IPv4 AddressingSubnet Masks•Subnet Mask Applications:Subnet mask applications (Continued) Determining if sender and receiver are on same subnet•How to determine if sender and receiver are on the same subnet?•Refer to algorithm provided on separate handout•Examples: –Are computer A (IP address: 128.193.78.3) and computer B (IP address: 128.193.78.250) on the same subnet?•Do you have sufficient information to answer the above mentioned question?–Class Participation Exercise # 2 (Question # 1)Subnets (Continued)Partial Subnetting•Subnet mask default