Return to Set

Upgrade to remove ads

View

  • Term
  • Definition
  • Both Sides

Study

  • All (61)

Shortcut Show

Next

Prev

Flip

GEO 211: TEST 2

Adiabatic process
A process in which a system (parcel of air) does not exchange heat with its surroundings.
Flip
Rising Air Parcel
Expansion and cooling occurs because there is less air pressure
Flip
Expansion
causes rising air to cool in temperature
Flip
cooling of air
takes place within the air parcel, without loosing its heat energy to the surroundings
Flip
Descending air parcel
-compresses -compression causes warming of the descending air
Flip
warming of air
takes place within the parcel without drawing heat energy from its surroundings
Flip
Dry Adiabatic Lapse Rate
-rate of temperature in a rising or descending unsaturated air parcel (5.5 degrees F / 1,000 ft)
Flip
Moist Adiabatic Lapse Rate
-rate of change of temperature in a rising or descending saturated air parcel -rate varies, always less than (5.5 degrees F / 1,000 ft) -heat added during condensation offsets some of the cooling due to expansion, the air no longer cools at the dry adiabatic rate but at a lesser rate
Flip
Other rates (not Adiabatic rates) Environmental Lapse Rate
-rate of decrease of air temperature (static air) with elevation (3.5 degrees F / 1,000)
Flip
Dew Point Lapse Rate
-rate of change of dew point temperature (1 degree F / 1,000 ft)
Flip
Lapse Rate
air temperature that changes with altitude
Flip
Environmental lapse rate
-rate at which the air temperature surrounding us will be changing if we were to climb upward into the atmosphere
Flip
Absolutely stable
the atmosphere is always absolutely stable when the environmental lapse rate is less than the moist adiabatic rate
Flip
Subsidence inversions
-atmospheric condition where air becomes warmer with inversions that form as air slowly sinks over a large rate
Flip
Neutral Stability
-if the lapse rate is exactly equal to the dry adiabatic rate, rising or sinking unsaturated air will cool or warm at the same rate as the air around it.
Flip
Absolutely unstable
when both air parcels rise, they will continue to rise on their own because the rising air parcels are warmer and less dense than the air around them
Flip
Absolute instability
results when the environmental lapse rate is greater than the dry adiabatic rate
Flip
Conditionally unstable
once the parcel is pushed upward, it will tend to move in that direction, the atmosphere is unstable for the saturated parcel
Flip
Conditional instability
occurs whenever the environmental lapse rate is between the moist adiabatic rate and the dry adiabatic rate. The atmosphere is ordinary at this state
Flip
Causes of instability
-the atmosphere becomes more unstable as the environmental lapse rate steepens. As the air temperature drops rapidly with increasing height. This may be brought on by either air aloft becoming colder or the surface air becomes warmer
Flip
Cooling of air aloft due to:
winds bringing in colder air (cold advection) clouds (or air) emitting infrared radiation to space (radiational cooling)
Flip
warming of surface air due to:
daytime solar heating of the surface an influx of warm air brought in by the wind (warm advection) air moving over a warm surface
Flip
Typical Cloud droplet
20 um in diameter
Flip
Typical rain drop
-2000 um (100 times larger than droplet) -a million cloud drops from a raindrop
Flip
Condensation Nucleus
-0.2 um
Flip
Precipitation Process
1. collision- coalescence process 2. Ice-crystal (Bergeron) process- snow, hail, sleet
Flip
Collision- coalescence process
-droplet growth in warm clouds -larger droplets accelerated downward by gravity, collide and merge with smaller droplets
Flip
Terminal Velocity
-constant speed obtained when upward air resistance balances with downward force of gravity
Flip
Formation of raindrops in a warm cloud depends on
1. liquid water content (major factor) 2. range of cloud droplet sizes 3. Cloud thickness 4. Electric charges and fields that bind droplets 5. Updrafts in the cloud
Flip
The nimbostratus clouds have
-weak updrafts -thus: light showers
Flip
Thick cumulonimbus have
-strong updrafts -thus heavy showers
Flip
Ice-crystals (Bergeron process)
Droplet growth in cold cloud with temperatures below 32 degrees F.
Flip
cloud droplets freeze at what temperature?
-40 degrees C
Flip
Supercooled water
-liquid water that exists when its temperature is below freezing -freezes when it impacts an object e.g. freezing rain
Flip
Glaciated
cloud top with only ice-crystals
Flip
ice-crystal process
growth of droplets and ice-crystals
Flip
growth by accretion
-"falling ice-crystals collide with supercooled cloud droplets and freeze on contact"
Flip
Growth by aggregation
-"falling ice-crystals collide and stick to other ice-crystals" -this produces snowflakes
Flip
if a snowflake melts
it continues its fall as raindrop
Flip
rain in cold clouds begin as
snow
Flip
Rain
-falling drops must have diameter of .5mm (0.02") or greater, to be considered rain. -less than 0.5 mm is drizzle
Flip
virga
-rain that evaporates before it reaches the surface -observed as streaks of falling precipitation
Flip
Snow
-snowflakes that will reach the surface -temperature profile underneath a cloud should be below freezing -rain begins as snowflakes in cold clouds
Flip
Freezing level
-is above 12,000 ft in summer when snowflakes melt before reaching the ground -much lower in winter
Flip
Sleet
-translucent balls of ice or frozen raindrops -occur when sub freezing layer is cold enough to freeze raindrops
Flip
Freezing rain
-supercooled rain that freezes on contact with exposed objects -also called glaze or "icing storm" when coating of ice creates shimmering landscapes
Flip
Snow Pellets
-small round ice particles formed in a cloud mainly by accretion -remain frozen particles and reach the surface as snow pellets (also called groupel) -groupel can easily be crushed unlike hailstone
Flip
Accretion
growth of precipitation particle by the collision of an ice crystal with a supercooled cloud droplet that freezes upon impact
Flip
Hail
-forms in cumulonimbus clouds where updrafts can reach 100 mph -occur in clouds with abundant supply of supercooled water
Flip
Measuring precipitation Standard instruments
1. standard rain gauge 2. recording gauges -tipping-bucket -weighing gauge
Flip
Standard rain gauge
-routinely used -measuring amount =0.01" or greater -less than 0.01"=reported as trace
Flip
Tipping-Bucket gauge
-consists of two buckets -each time a bucket fills up with 0.01" of rain, it tips, sending an electric signal to the remote recorder
Flip
Weighing gauge
-collects rainfall in a cylinder that rests on a sensitive weighing platfrom -when cylinder fills up, electric impose is transmitted to a pen that records data
Flip
measuring snowfall
1.depth (with calibrated stick) 2.Water equivalent (general ratio is 10:1) eg. 10" deep= 1 inch of rainfall
Flip
Cloud seeding
-silver iodide and dry ice are injected is a cloud to act as condensation nuclei -works better in cold clouds with supercooled water
Flip
Saturation Vapor Pressure
total number of vapor molecules around the droplet remains fairly constant and defines the droplet
Flip
Curvature effect
smaller cloud droplets exhibit a greater curvature, which causes a more rapid rate of evaporation
Flip
Solute effect
this condition reduces the equilibrium vapor pressure
Flip
Fall streaks
ice-crystals and snowflakes fall from high cirrus clouds
Flip
snow squall
more intense snow shower
Flip
snow grains
small, opaque grains of ice, equivalent of drizzle
Flip
( 1 of 61 )
Upgrade to remove ads
Login

Join to view and access 3M+ class-specific study document.

or
We will never post anything without your permission.
Don't have an account?
Sign Up

Join to view and access 3M+ class-specific study document.

or

By creating an account you agree to our Privacy Policy and Terms Of Use

Already a member?