1N746A - 1N759A Series1N746A-1N759A Rev. A1 Device VZ (V) ZZ (ΩΩΩΩ) IZT (mA) IR1 (µµµµA) VR (V) IR2 (µµµµA) VR TA=150°°°°C (V) TC (%/°°°°C) IZRM* (mA) 1N746A 1N747A 1N748A 1N749A 1N750A 3.3 3.6 3.9 4.3 4.7 28 24 23 22 19 20 20 20 20 20 10 10 10 2.0 2.0 1.0 1.0 1.0 1.0 1.0 30 30 30 30 30 1.0 1.0 1.0 1.0 1.0 - 0.070 - 0.065 - 0.060 +/- 0.055 +/- 0.030 110 100 95 85 75 1N751A 1N752A 1N753A 1N754A 5.1 5.6 6.2 6.8 17 11 7.0 5.0 20 20 20 20 1.0 1.0 0.1 0.1 1.0 1.0 1.0 1.0 20 20 20 20 1.0 1.0 1.0 1.0 +/- 0.030 + 0.038 + 0.045 + 0.050 70 65 60 55 1N755A 1N756A 1N757A 1N758A 1N759A 7.5 8.2 9.1 10 12 6.0 8.0 10 17 30 20 20 20 20 20 0.1 0.1 0.1 0.1 0.1 1.0 1.0 1.0 1.0 1.0 20 20 20 20 20 1.0 1.0 1.0 1.0 1.0 + 0.058 + 0.062 + 0.068 + 0.075 + 0.077 50 45 40 35 38 1N746A - 1N759A Series Half Watt ZenersAbsolute Maximum Ratings* TA = 25°C unless otherwise notedTolerance: A = 5%Electrical Characteristics TA = 25°C unless otherwise noted@@@NOTES:1) These ratings are based on a maximum junction temperature of 200 degrees C.2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.*These ratings are limiting values above which the serviceability of the diode may be impaired.*IZRM (Maximum Zener Current Rating) Values shown are based on the JEDEC rating of 400 milliwatts. Where the actual zener voltage (VZ) is known at theoperating point, the maximum zener current may be increased and is limited by the derating curve. Symbol Parameter Value Units TSTG Storage Temperature Range -65 to +200 °C TJ Maximum Junction Operating Temperature + 175 °C Lead Temperature (1/16” from case for 10 seconds) + 230 °C PD Total Device Dissipation Derate above 25°C 500 3.33 mW mW/°C DO-35COLOR BAND DENOTES CATHODE2001 Fairchild Semiconductor Corporation1N746A - 1N759A Series1N746A-1N759A Rev. A1Typical CharacteristicsZener Current vs. Zener Impedence0.1 0.2 0.5 1 2 5 10 20125102050100200500100020005000I - ZENER CURRENT (mA)Z - IMPEDANCE (ohms) T = 25 C ºA Z Z V = 3.3V Z V = 5.1V Z V = 12.0V Z V = 33.0V Z 3.3 Zener Voltage vs. Temperature12 510203012345I - ZENER CURRENT (mA)V - ZENER VOLTAGE (V) T = -25 C ºA Z Z V = 3.3V Z T = 85 C ºA T = 100 C ºA T = 25 C ºA T = 125 C ºA Zener Current vs. Zener Voltage12 51020305101520253035I - ZENER CURRENT (mA)V - ZENER VOLTAGE (V) T = 25 C ºA Z Z V = 12.0V Z V = 3.3V Z V = 5.1V Z V = 33.0V Z 5.1 Zener Voltage vs. Temperature12 510203044.555.56I - ZENER CURRENT (mA)V - ZENER VOLTAGE (V) T = -25 C ºA Z Z V = 5.1V Z T = 85 C ºA T = 100 C ºA T = 25 C ºA T = 125 C ºA 12 Zener Voltage vs. Zener Temperature12 5102030051015I - ZENER CURRENT (mA)V - ZENER VOLTAGE (V) T = -25 C ºA Z Z V = 12.0V Z T = 85 C ºA T = 100 C ºA T = 25 C ºA T = 125 C ºA 33 Zener Voltage vs. Zener Temperature12 51020302025303540I - ZENER CURRENT (mA)V - ZENER VOLTAGE (V) T = -25 C ºA Z Z V = 33.0V Z T = 85 C ºA T = 100 C ºA T = 25 C ºA T = 125 C ºADO-35 Tape and Reel DataSeptember 1999, Rev. ADO-35 Packaging InformationT50RTNR1310,000254x79x79430,0000.1372.23Note/CommentsPackaging OptionPackaging typeReel Size (inch diameter)Qty per Reel/Tube/BagInt Box Dimension (mm)Max qty per BoxWeight per unit (gm)Weight per Reel/Ammo (kg) Inside Tape Spacing (mm) 52T50AAmmo-5,000406x267x18450,0000.1370.80052BulkStandard(no flow code)Bag-500279x133x1085,0000.137--DO-35 Packaging Configuration: Figure 1.0Soabar Label sampleP.O. No.TYPE IN5225A MARK BLK-BRNREV A2 PART No.PKG EC No.QTY 10,000 M.O. No. OX5046F035Q.C. DATE D9903MFD. UNDER US PAT 3.025.589 & OTHER US PATS & APPLICATIONSKraft Paper WoundBetween LayersCorrugated Outer LinerRed/Blue (Cathode)White (Anode)Soabar LabelDO-35 PackagingInformation Table: Figure 2.0T50R TNR OptionsREEL DIMENSIONSITEM DESCRIPTION SYMBOL MINIMUM MAXIMUMReel Diameter D1 10.375 10.625Arbor Hole Diameter (Standard) D2 1.245 1.255Core Diameter D3 3.190 3.310Flange to Flange Inner Width W1 3.400Note: All Dimensions are in inchesD1D3W1D2DO-35 Reel Dimensions:Figure 3.0Soabar Label©2000 Fairchild Semiconductor InternationalDO-35 Tape and Ammo Data, continuedSeptember 1999, Rev. ATAPING DIMENSIONSINCH MM MILS NOTESA 2.520 64.00 2519 Overall width+0.066/ +1.69/ +66.5/-0.027 -0.69 -27.0B 2.047±0.027 52 ±0.69 2047±27 Inside Tape SpacingC 0.200 ±0.0157 5.08 ±0.40 200 ±15.7 Component PitchD 0.047(max) 1.2(max) 47(max) Component MisalignmentE 0.022(max) 0.55(max) 22(max) Tape MismatchF 0.027(max) ±0.69 ±27 Units in line w/ one anotherG 0.126(min) 3.2(min) 126(min) Lead amount between tapesH 0 0 0 Lead amount beyond tapesL1-L2 ±0.027 ±0.69 ±27 Delta between two leads254mm x 79mm x 79mmIntermediate Container (5,000 cap)T50A OptionDO-35 A mmo PackingConfiguration: Figure 4.0AFCDL2L1EBGHDO-35 Bulk PackingConfiguration: Figure 6.0133mm x 95mmAnti-static bag (500/bag)Im 102mm x 76mm x 127mmmediate Box (1,000 cap)DO-35 Taping Dimension: Figure 5.0Soabar Label(on top of box)DO-35 (FS PKG Code D2)DO-35 Package DimensionsMarch 2000, Rev. A1:1Scale 1:1 on letter size paperDimensions shown below are in millimetersPart Weight per unit (gram): 0.137©2000 Fairchild Semiconductor InternationalTRADEMARKSThe following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and isnot intended to be an exhaustive list of all such trademarks.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices orsystems which, (a) are intended for surgical implant intothe body, or (b) support or sustain life, or (c) whosefailure to perform when properly used in accordancewith instructions for use provided in the labeling, can bereasonably expected to result in significant injury to theuser.2. A critical component is any component of a lifesupport device or system whose failure to perform canbe reasonably expected to cause the failure of the lifesupport device or system, or to affect its safety