View Full Document

Laboratory Manual



View the full content.
View Full Document
View Full Document

3 views

Unformatted text preview:

PART III LABORATORY MANUAL Electromagnetic Waves and Transmission Lines By Dr Jayanti Venkataraman 202 Experiment I Calibration of the Network Analyzer Objective Calibrate the Network Analyzer for Transmission Procedure i Turn the Power On ii Set the Frequency for Measurements MENU for HP8753ET choose SWEEP SETUP CW FREQ 600 M iii Choose appropriate Calkit CAL CALKIT SELECT CALKIT N 50 iv Calibrate the NA with a cable on port 1 a HP8752 Network Analyzer CAL CALIBRATE MENU RESPONSE Connect the cable from port 1 to port 2 THRU Remove cable from port 2 and connect a SHORT at the end of the cable from port 1 SHORT M Connect an OPEN at the end of the cable from port 1 OPEN M DONE RESPONSE NA calculates cal coefficients b HP8753 Network Analyzer CAL CALIBRATE MENU FULL 2 PORT Ignore error message REFLECTION FORWARD Electromagnetic Waves and Transmission Lines By Dr Jayanti Venkataraman 203 Connect a SHORT at the end of cable from port 1 SHORTS SHORT M NA beeps and underlines DONE SHORTS Connect an OPEN at the end of cable from port 1 OPENS OPEN M NA beeps and underlines DONE OPENS Connect 50 load at the end of cable from port 1 LOAD NA beeps and underlines REVERSE Connect a SHORT at port 2 SHORTS SHORT F NA beeps and underlines DONE SHORTS Connect an OPEN at port 2 OPENS OPEN F NA beeps and underlines DONE OPENS Connect 50 load at port 2 LOAD NA beeps and underlines STANDARDS DONE TRANSMISSION Connect the cable from port 1 to port 2 FWD TRANS THRU FWD MATCH THRU REV TRANS THRU REV MATCH THRU NA beeps and underlines all four STANDARDS DONE ISOLATION OMIT ISOLATION ISOLATION DONE DONE 2 PORT CAL NA calculates cal coefficients Electromagnetic Waves and Transmission Lines By Dr Jayanti Venkataraman 204 b HP8753ET Network Analyzer CAL CALIBRATE MENU ENHANCED RESPONSE TRAN REFL ENH RESP REFLECTION Connect a SHORT at the end of cable from port 1 SHORTS SHORT M NA beeps and underlines DONE SHORTS Connect an OPEN at the end of cable from port 1 OPENS OPEN M NA beeps and underlines



Access the best Study Guides, Lecture Notes and Practice Exams

Loading Unlocking...
Login

Join to view Laboratory Manual and access 3M+ class-specific study document.

or
We will never post anything without your permission.
Don't have an account?
Sign Up

Join to view Laboratory Manual and access 3M+ class-specific study document.

or

By creating an account you agree to our Privacy Policy and Terms Of Use

Already a member?