FLOW CONTROLSFR10-32 Flow Regulator, Orifi ce Adjustable, 5.362.1DESCRIPTIONA screw-in, cartridge-style, pressure-compensated, manually-operated, bi-directional hydraulic fl ow regulating valve. An internal compensator spool provides compensated fl ow across the proportional orifi ce regardless of fl ow direction.OPERATIONThe FR10-32 provides regulated fl ow in both directions, from port ➁ to port ➂, or from port ➂ to port ➁. Port ➀ should be blocked. Regulated fl ow increases from closed to fully open with clockwise rotation. The valve will maintain the set fl ow rate regardless of pressure variations at each of the ports.FEATURES• Hardened seat for long life and low leakage.• Various adjustment options.• Excellent linearity and hysteresis.• Industry common cavity.RATINGSOperating Pressure: Inlet: 240 bar (3500 psi)Rated Inlet Flow Rate: 19 lpm (5 gpm); see performance chartInternal Leakage: 0.38 ml/minute (0.10 gpm/minute) maximum Temperature: -40 to 120°C with Buna N sealsFiltration: See page 9.010.1Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1Installation: No restrictions; See page 9.020.1Cavity: VC10-3; See page 9.110.1Cavity Tool: CT10-3XX; See page 8.600.1Seal Kit: SK10-3X-MM; See page 8.650.1Knob Kit: Part Number 6113160USASI/ISO:SYMBOLSPERFORMANCE (Cartridge Only)2311 1-1/21/2 2 2-1/2 3TURNSFLOW lpm/gpmRegulated Flow vs. Turns103 bar/1500 psi Input Pressure69 bar/1000 psi at Regulated Port32 cSt/150 ssu oil at 40°C15.1/411.4/37.6/23.8/122.7/618.9/5- - ➂ to ➁— ➁ to ➂691000PRESSURE DROP bar/psiFLOW lpm/gpmRegulated Flow vs. Pressure Drop240 bar/3500 psi Input Pressure—— ➁ to ➂ - - - - ➂ to ➁32 cSt/150 ssu oil at 40°C138200020730003 TURNS2 TURNS1 TURN1.5 TURNS15.1/411.4/37.6/23.8/122.7/618.9/5HYDRAFORCE.com®Blue rectangles are links to other catalog pages.FR10-325.362.2Cartridge: Weight: 0.30 kg. (0.68 lbs.) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N O-rings and polyester elastomer back-ups standard. Standard Ported Body: Weight: 0.36 kg. (0.80 lbs.) Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi). Ductile iron bodies available; dimensions may differ. See page 8.010.1DIMENSIONSMATERIALSTO ORDER1.92MAX.48.80.56ACROSSFLATS14.22.1454.3MILLIMETREINCH3/16" HEXALLEN HEAD'A' OPTION1-5/8" DIA.PLASTIC KNOB'E' OPTIONCAP'C' OPTIONTORQUE: 25 ft-lbs max.(33.9 Nm)2.27MAX.57.71.3634.51.2531.81.2531.82.5063.52312310.287.12.0050.80.256.42.6266.52.1253.80.7418.81.8446.71.84MAX.ACROSSFLATS46.71.0025.4FR10-32 __ - __ __ __ - __ Seals N Buna N (Std.) V Fluorocarbon Adjustment Option Extended Shaft Only Blank 3/16" Hex Allen Head A Option ‘A’ w/Cover Cap C Plastic Knob E Porting Cartridge Only 0 SAE 6 6T SAE 8 8T 1/4 in. BSP* 2B 3/8 in. BSP* 3B*BSP Body; U.K. Mfr. OnlyBi-Directional®HYDRAFORCEHYDRAFORCE.com®Blue rectangles are links to other catalog
View Full Document