Disk SchedulingUser-Space I/O SoftwareDisksDisk Hardware (1)Disk StructureDisk SchedulingDisk Scheduling (Cont.)FCFSSSTFSSTF (Cont.)SCANSCAN (Cont.)C-SCANC-SCAN (Cont.)C-LOOKC-LOOK (Cont.)Selecting a Disk-Scheduling AlgorithmRAIDRAID LevelsRaid Levels(continued)Raid Levels (continued)Raid Levels 6 and 7Disk AttachmentNetwork-Attached Storage(NAS)Storage-Area Network (SAN)1Disk SchedulingChapter 14Based on the slides supporting the text and B.Ramamurthy’s slides from Spring 20012User-Space I/O SoftwareLayers of the I/O system and the main functions of each layer3DisksDisk Hardware (1)Disk parameters for the original IBM PC floppy disk and a Western Digital WD 18300 hard disk4Disk Structureo Disk drives are addressed as large 1-dimensional arrays of logical blocks, where the logical block is the smallest unit of transfer. o The 1-dimensional array of logical blocks is mapped into the sectors of the disk sequentially.n Sector 0 is the first sector of the first track on the outermost cylinder.n Mapping proceeds in order through that track, then the rest of the tracks in that cylinder, and then through the rest of the cylinders from outermost to innermost.5Disk Schedulingo The operating system is responsible for using hardware efficiently — for the disk drives, this means having a fast access time and disk bandwidth.o Access time has two major componentsn Seek time is the time for the disk are to move the heads to the cylinder containing the desired sector.n Rotational latency is the additional time waiting for the disk to rotate the desired sector to the disk head.o Minimize seek timeo Seek time » seek distanceo Disk bandwidth is the total number of bytes transferred, divided by the total time between the first request for service and the completion of the last transfer.6Disk Scheduling (Cont.)o Several algorithms exist to schedule the servicing of disk I/O requests. o We illustrate them with a request queue (0-199).98, 183, 37, 122, 14, 124, 65, 67Head pointer 537FCFSIllustration shows total head movement of 640 cylinders.8SSTFoSelects the request with the minimum seek time from the current head position.oSSTF scheduling is a form of SJF scheduling; may cause starvation of some requests.oIllustration shows total head movement of 236 cylinders.9SSTF (Cont.)10SCANoThe disk arm starts at one end of the disk, and moves toward the other end, servicing requests until it gets to the other end of the disk, where the head movement is reversed and servicing continues.oSometimes called the elevator algorithm.oIllustration shows total head movement of 208 cylinders.11SCAN (Cont.)12C-SCANo Provides a more uniform wait time than SCAN.o The head moves from one end of the disk to the other. servicing requests as it goes. When it reaches the other end, however, it immediately returns to the beginning of the disk, without servicing any requests on the return trip.o Treats the cylinders as a circular list that wraps around from the last cylinder to the first one.13C-SCAN (Cont.)14C-LOOKoVersion of C-SCANoArm only goes as far as the last request in each direction, then reverses direction immediately, without first going all the way to the end of the disk.15C-LOOK (Cont.)16Selecting a Disk-Scheduling Algorithmo SSTF is common and has a natural appealo SCAN and C-SCAN perform better for systems that place a heavy load on the disk.o Performance depends on the number and types of requests.o Requests for disk service can be influenced by the file-allocation method.o The disk-scheduling algorithm should be written as a separate module of the operating system, allowing it to be replaced with a different algorithm if necessary.o Either SSTF or LOOK is a reasonable choice for the default algorithm.17RAID o RAID – multiple disk drives provides reliability via redundancy.o Redundant Array of Independent Disks (RAID)o RAID is arranged into six different levels.o Several improvements in disk-use techniques involve the use of multiple disks working cooperatively.o Disk striping uses a group of disks as one storage unit.o RAID schemes improve performance and improve the reliability of the storage system by storing redundant data.n Mirroring or shadowing keeps duplicate of each disk.n Block interleaved parity uses much less redundancy.18RAID Levels19Raid Levels(continued)o Raid levels 0 through 2 o Backup and parity drives are shaded20Raid Levels (continued)o Raid levels 3 through 5o Backup and parity drives are shaded21Raid Levels 6 and 7o RAID 6:P and Q redundancyo RAID 7: heterogeneous disks array22Disk Attachmento Disks may be attached one of two ways:1.Host attached via an I/O port2.Network attached via a network connection23Network-Attached Storage(NAS)24Storage-Area Network
View Full Document
Unlocking...