Slide 1IntroductionWhat is SBR ?Operation of SBROperation of SBROperation of SBROperation of ASBROperation of SBBR systemWhat are advantages of SBR ?What are disadvantages of SBR ?Influence of salt in SBRInfluence of heavy metal in SBRWhat are advantages and disadvantages of ASBRInfluence of mixing in ASBRComparison of SBR and SBBRComparison of SBR and SBBRConclusionConclusionThank youTHE CHARACTERISTIC OF THE SEQUENCING BATCH REACTOR (SBR), ANAEROBIC SEQUENCING BATCH REACTOR (ASBR) AND SEQUENCING BATCH BIOFILM REACTOR (SBBR)KooBum KimIntroductionOperation of several full-scale fill-and-draw systems were introduced at between 1914 and 1920. Interest in SBRs was reconsidered in the late 1950s and early 1960s.Improvements in aeration devices and controls have allowed SBRs to successfully compete with conventional activated sludge systems.What is SBR ?1. Screening: 2. Pumping: 3. Aerating4. Removing sludge5. Removing scum:6. Killing bacteria:A single reactorOperation of SBR1. Mix fill 2. React fill3. React4. Settle5. Decant/Sludge wasteOperation of SBROperation of SBROperation of ASBROperation of SBBR systemWhat are advantages of SBR ?AdvantagesEqualization, primary clarification (in most cases), biological treatment, and secondary clarification can be achieved in a single reactor vessel.Operating flexibility and control.Minimal footprint.Potential capital cost savings by eliminating clarifiers and other equipment.What are disadvantages of SBR ?DisadvantagesA higher level of sophistication such as automated switches, and automated valves. is required especially for larger systems.Lots of sludge amount and high sludge volume index.Influence of salt in SBRCOD, NH4-N and PO4-P removal rates decreased with increasing salt concentration.Because of adverse effects of salt on microorganisms.Influence of heavy metal in SBR• The bio-sludge could adsorb Zn2+ and Cu2+ from the wastewater.• The heavy metals adsorption efficiency of the system increased with the increase of MLSS concentration of the system.• The adsorption efficiency can affect the removal efficiency other nutrient.What are advantages and disadvantages of ASBRAdvantagesNo short circuit, as in the case of fixed-bed continuous systems.High efficiency for both COD removal and gas production.No primary and secondary settles.Flexible control.DisadvantagesLow performance efficiency if overloadedInfluence of mixing in ASBR• The removal efficiencies in the two ASBR1 and ASBR2 reactors operated under mixed liquor recirculation and Mechanic show mean values of COD and TSS removals efficiencies of 40% and 65%, and average removal efficiencies of 60% and 80% for COD and TSS, respectivelyMixing type in react step : Liquor recirculation / MechanicComparison of SBR and SBBR• SBR system• SBBR system (media)Comparison of SBR and SBBR• Comparative performance evaluation of SBBR with other reactorConclusionAdvantages of SBRs are that equalization, primary clarification, biological treatment, and secondary clarification can be achieved in a single reactor vessel. These advantages can reduce the treatment area and cost.The pollutant removal efficiency of SBR system is shown high removal efficiency for nitrogen and phosphate. And the SBR system can remove heavy metal such as Zn2+, Cu2+, Pb2+ and Ni2+ with organic pollutant and nitrogen.ConclusionThe efficiency of SBR system to treat specific nutrient (COD, NH4-N and PO4-P) is affected on salt concentration in wastewater due to adverse effects of salt on microorganisms.The heavy could reduce COD and BOD5 removal abilities, because adsorption efficiency of the heavy metals of the system increased with the increase of MLSS concentration of the system.The comparison of removal efficiency between SBR and SBBR shows that the efficiency of SBBR system is higher than SBR system for COD, BOD.Thank