COMPUTER NETWORKS PROJECTSubmission Deadline: 13th June 2021, 11:59pmInstructions:Don’t copy, don’t cheat. The evaluation criteria is very strict so do everything by yourselfelse you will be in big trouble.The statements are self-Explanatory.1. Use Packet Tracer Instructor Version wto simulate this network.2. Don’t cheat, your efforts will be valued but the cheater will be marked 0.3. Everything is self-explained, solve it yourself.“Our greatest weakness lies in giving up. The most certain way to succeed is always totry just one more time.”“A creative man is motivated by the desire to achieve, not by the desire to beat others.”You are given the network design with minimal technical documentation; your task is tomake this up and run in 4 hrs. Use all your mind capabilities to solve this as quickly as youcan and live the rest of your weekend relaxed.1. Following are the steps you need to perform in the network according to the given layout.Configure this scenario and find your given IP address in the file " IP address " attached withthis. Find out the Network Addresses and start working with them. And Use them as youwant.2. Please find the Number of required hosts per subnet in the given file. Each Student isgiven a different number of required hosts per subnet. Networks are labeled Alphabeticallyin the given file of IP ADDRESSES. The networks with Router23 are not labelled so you canchoose any number of hosts for those subnets.3. Use EIGRP in First Block for Routing , OSPF with area 1 in Second Block , Rip in Block Thirdand OSPF with area 0 in the last block as mentioned on the top of each block.4. Use Redistribution on Router6 and Router13 for connecting EIGRP with OSPF and OSPFwith RIP. Use Redistribution on Router11 for connecting OSPF area 1 with OSPF area 0.5. All hosts in EIGRP, OSPF area 1 and RIP will get IP addresses from "DHCP Server"present in the first block.6. All hosts in OSPF area 0 will get hosts from “DHCP Server” present in its ownblock.7. You have to use VLSM in each network of the topology.8. You have to IMPLEMENT NAT in Router7 with the NetworkG. Use the Private IP Addressgiven to you in the attached file for Natting.9. One of the PCs of Network L will not be allowed to access the TFTP server. One of thePCs of Network E will not be allowed to access the Data server. All hosts connected innetwork A will not be allowed to access "Web Server".10. The TFTP and Data servers do not need to have running services. They will simply betreated as hosts. You just need to block the access of those servers from respectivenetworks. (Access List)“If you're going through hell, keep going.” Winston Churchill “Thewill to win, the desire to succeed, the urge to reach your full potential... These are the keys that will unlock the door to personal excellence.”Good