1L-4 constant accelerationand free fall (M-3)REVIEW• Acceleration is the change in velocity with time• Galileo showed that in the absence of air resistance, all objects, regardless of their mass, fall to earth with the same acceleration g• g 10 m/s2  the speed of a falling object increases by 10 m/s every second• Free fall is an example of motion with constant acceleration1Motion with constant acceleration• acceleration is the rate at which the velocity changes with time (increases or decreases)• acceleration is measured in distance units divided by (time)2, for example: m/s2, cm/s2, ft/s2• We will see how the velocity of an object changes when it experiences constant acceleration.• First, we’ll consider the simplest case where the acceleration is zero, so that the velocity is constant.2Simplest case: constant velocity (a=0) • If a = 0, then the velocity v is constant. • In this case the distance xfan object will travel in a certain amount of time t is given by distance = velocity x timexf= xi+ v t (for a = 0)•xiis the starting (initial) position, and xfis the final position. 3Example: constant velocity (a = 0)A car moves with a constant velocity of 25 m/s. How far will it travel in 4 seconds?Solution:Suppose we take the starting point xias zero. Then, xf= 0 + vt = 0 + (25 m/s)(4 s) = 100 m4The 100 m dash • Usain Bolt in 2009 set a new world record ( ) in the 100 m dash at 9.58 s.• Did he run with constant velocity, or was his motion accelerated?• Initially at the starting line he was not moving (at rest), then he began moving when the gun went off, so his motion was clearly accelerated• Although his average speedwas about 100 m/10 s = 10 m/s, he did not maintain this speed during the entire race. 5100 m dash Seoul 198862How to calculate accelerationExample: Starting from rest, a car accelerates up to 50 m/s (112 mph) in 5 sec. Assuming that the acceleration was constant, compute the acceleration.Solution: acceleration (a) = rate of change of velocity with time2change in velocity final velocity initial velocitya= = time interval final time initial time50m / s 0m / s 50 m / s= = = 10 m / s5s 0s 5s7Motion with Constant acceleration• Suppose an object moves with a constant acceleration a. If at t = 0 its initial velocity is (vi),then we want to know what its final velocity (vf)be after a time t has passed.• final velocity = initial velocity + acceleration  timevf= vi+ a t (for constant acceleration)• a t is the amount by which the velocity increasesfrom vito vfafter a time t.• Note that if a = 0, vf= vi, i.e., velocity is constant.8Example: constant accelerationA car moving initially at vi= 3 m/s begins accelerating with a = 2 m/s2. What is its velocity at t = 5 s? Solution: vf= vi+ a  t= 3 m/s + 2 m/s2  5 s= 3 m/s + 10 m/s= 13 m/s9Example – deceleration – slowing down• Deceleration means that the acceleration is opposite in direction to the velocity• Suppose you are moving at vi=15 m/s and apply the brakes. The brakes provide a constant deceleration of –5 m/s2. How long will it take the car to stop?•vf= vi+ a t• 0 = 15 m/s + (–5 m/s2) t• 0 = 15 – 5t  5t = 15  t = 15/5 = 3 s10Free Fall:Motion with constant acceleration• According to Galileo, in the absence of air resistance, all objects fall to earth with a constant acceleration a = g  10 m/s2• g is the special symbol we use for the acceleration due gravity.• Since we know how to deal with constant acceleration, we can also solve problems involving free fall.11Free fall – velocity and distance • If we observe an object falling from the top of a building we find that it gains speed as it falls • Every second, its speed increases by 10 m/s.• We also observe that it does not fall equaldistances in equal time intervals. The formula in the right column was discovered by Galileo. 12time (s) velocity (m/s) distance y (m)0 0 0 = ½ 10 (0)21 10 5 = ½ 10 (1)22 20 20 = ½ 10 (2)23 30 45 = ½ 10 (3)24 40 80 = ½ 10 (4)25 50 125 = ½ 10 (5)23Ball dropped from rest• If the ball is dropped from rest, that means that its initial velocity is zero, vi= 0• Then its final velocity after a time t is vf= a t, where a = g  10 m/s2so, vf= g t• Example: What is the velocity of a ball 5 sec. after it is dropped from rest from the top of the Sears Tower (Willis Tower)? Solution: vf= g t = 10 m/s2x 5 s = 50 m/s (about 112 mph)13Relationship between timeand distance in free fall • It would be useful to know how long it would take for an object, dropped from rest, to fall a certain distance• For example, how long would it take an object to fall to the ground from the top of the Sears Tower, a distance of 442 m?• Or, after a certain time, how far will an object, dropped from rest, have fallen?14Falling distance• Suppose an object falls from rest so its initial velocity vi= 0. • After a time t the ball will have fallen a distance: yf= ½ - acceleration - time2•yf= ½ g t2 • This is the formula Galileo discovered15Falling from the Sears TowerExampleHow far would a ball dropped from rest at the top of the Sears Tower fall in 5 seconds?Solutionyf= ½ 10 m/s2x (5 s)2= 5 m/s2x 25 s2= 125 m (about 410 feet)16Time to reach the ground• Another interesting question, is how long it will take an object, dropped from rest from the top of the Sears Tower (442 m) take to reach the ground?• To answer this question we need to solve the time-distance formula for t17222ffff2y 2y1y = gt 2y = gt t = t = 2gg2×442So : t = = 9.4 s.10Velocity as object hits the ground• How fast will the object be moving when it hits the ground?• We apply the velocity vs. time relation:–vf= vi+ g t, with vi= 0.–vf= g t = 10 m/s2  9.4 s = 94 m/s–or about 210 mph (neglecting air resistance)184Time to go up• Suppose a ball is thrown straight up with a speed vi. When does it reach its maximum height?• As it rises, it slows down (decelerates)because gravity is pulling it down.• At its maximum height, it is instantaneouslyat rest, so that vf= 0 at the top.• vf= vi+ a t applies whether an object isfalling or rising. On the way down it speedsup, so adown= +g = 10m/s2; on the wayup, it slows down, so aup= g = 10m/s2• Since vf= 0 at the top, then we have:vf= 0 = vi+ (g) t, so tup= vi/ g (time to