DOC PREVIEW
UMD ENMA 490 - Multilayer Microfluidics

This preview shows page 1 out of 3 pages.

Save
View full document
View full document
Premium Document
Do you want full access? Go Premium and unlock all 3 pages.
Access to all documents
Download any document
Ad free experience
Premium Document
Do you want full access? Go Premium and unlock all 3 pages.
Access to all documents
Download any document
Ad free experience

Unformatted text preview:

Multilayer MicrofluidicsIntroductionProblem DefinitionTo use micro processing techniques to address the problems associated with multi-level channel routing in bio-micro fluidic applications. Integrating materials application to build the layers of the multilevel micro fluidics system. Using a control system to arrange fluidic flow through the multilevel micro fluidics.Problem ScopeThe mission of this project is to create a multi-level micro fluidics system for bio-micro fluidic application. The packaging of this device should be efficient, feasible and versatile because we would want the fluid flow to reach multi-levels instead of remaining on a single layer. Active control devices will control the fluid flow. To flow from one layer to another layer we would have vertical vias or interconnects from the first layer to the next. Therefore to process this we would need the basic knowledge of materials that are feasible and current research accomplished on micro fluidics. These are mentioned in the Materials Information and Literature Research section.Due to time budget our group decided to neglect the biochemistry interactions of the fluid and the interior walls of the channels. We will only consider the fluid flow and how to transport the fluid from one reservoir to another within the system. We will be looking at many control systems that will manage the fluid flow throughout the channels and interconnects. All the control systems we will be discussing will be internally integrated within the micro fluidics system. The design of the control system will be discussed more thoroughly in stage 3 of the Devices Design Stages. Therefore the biochemistry interactions will not be discussed in our report due to time constraints, and we will not use external control systems.Initial Materials Informationi. Reasons for narrowing the list of potential materialsii. Overview of the mechanical and electrical properties of each materialiii. Process considerations for each type of materialInitial literature research resultsiv. Discussion of the predominate designs and processes currently researcheda. Valvesb. Channel routingc. Electrical Connectionsd. Electrokinetics, etc.v. Conclusions drawn from initial literature researchDevice Design OverviewIn each device design stages we will have objectives, device logic, device dimensions, materials used in the design, the processing method, additional issues (if necessary), manufacturing results (if necessary) and experimental results (if necessary). This is can be shown visually in Figure 1.The initial micro-channel design consists of only 2 layers with interconnects. The initial design purpose is only used to test if the fluid flows through channels. Controls are neglected in this design because if fluid cannot flow through the channels then adding controls are not necessary.Brief summary of each Device Design Stage up to the final design Selectionvi. Includes the chart outlining the major points of each device stage.Figure 1: Chart outlining the major points of each device stages.MultilayerMicrofluidicsIntroductionProblem DefinitionTo use micro processing techniques to address the problems associated withmulti-level channel routing in bio-micro fluidic applications. Integrating materialsapplication to build the layers of the multilevel micro fluidics system. Using acontrol system to arrange fluidic flow through the multilevel micro fluidics. Problem ScopeThe mission of this project is to create a multi-level micro fluidics system for bio-micro fluidic application. The packaging of this device should be efficient, feasibleand versatile because we would want the fluid flow to reach multi-levels instead ofremaining on a single layer. Active control devices will control the fluid flow. Toflow from one layer to another layer we would have vertical vias or interconnectsfrom the first layer to the next. Therefore to process this we would need the basicknowledge of materials that are feasible and current research accomplished on microfluidics. These are mentioned in the Materials Information and Literature Researchsection.Due to time budget our group decided to neglect the biochemistry interactions ofthe fluid and the interior walls of the channels. We will only consider the fluid flowand how to transport the fluid from one reservoir to another within the system. Wewill be looking at many control systems that will manage the fluid flow throughoutthe channels and interconnects. All the control systems we will be discussing will beinternally integrated within the micro fluidics system. The design of the controlsystem will be discussed more thoroughly in stage 3 of the Devices Design Stages.Therefore the biochemistry interactions will not be discussed in our report due to timeconstraints, and we will not use external control systems.Initial Materials Informationi. Reasons for narrowing the list of potential materialsii. Overview of the mechanical and electrical properties of each materialiii. Process considerations for each type of materialInitial literature research resultsiv. Discussion of the predominate designs and processes currently researcheda. Valvesb. Channel routingc. Electrical Connectionsd. Electrokinetics, etc.v. Conclusions drawn from initial literature researchDevice Design OverviewIn each device design stages we will have objectives, device logic, devicedimensions, materials used in the design, the processing method, additional issues (ifnecessary), manufacturing results (if necessary) and experimental results (ifnecessary). This is can be shown visually in Figure 1. The initial micro-channel design consists of only 2 layers with interconnects. Theinitial design purpose is only used to test if the fluid flows through channels.Controls are neglected in this design because if fluid cannot flow through thechannels then adding controls are not necessary. Brief summary of each Device Design Stage up to the final design Selectionvi. Includes the chart outlining the major points of each device stage.Device StagesObjectivesDevice LogicDevice DimensionsMaterialsProcessing MethodAdditional IssuesManufacturing Results Experimental ResultsConclusions1 2 3 Final Manufactured Design Final Proposed Design Figure 1: Chart


View Full Document

UMD ENMA 490 - Multilayer Microfluidics

Documents in this Course
Load more
Download Multilayer Microfluidics
Our administrator received your request to download this document. We will send you the file to your email shortly.
Loading Unlocking...
Login

Join to view Multilayer Microfluidics and access 3M+ class-specific study document.

or
We will never post anything without your permission.
Don't have an account?
Sign Up

Join to view Multilayer Microfluidics 2 2 and access 3M+ class-specific study document.

or

By creating an account you agree to our Privacy Policy and Terms Of Use

Already a member?