Quick Start GuideFor Quartus II SoftwareThis Quick Start Guide will show you how to set up a Quartus® II project, enter timing requirements, and compile the design into an Altera® device.1Three-Step Design Compilation in Quartus II Softwarea. Specify project directory, name, and top-level entity.b. Specify project design files.c. Specify Altera device family for the design.d. Specify device (or specify device information for automatic device selection).e. Specify other EDA tools to be used for this project.f. Review project settings.Run the New Project Wizarda. On the Process menu, click Start Analysis & Synthesis to build a netlist in preparation for TimeQuest timing analyzer use.b. On the Tools menu, click TimeQuest Timing Analyzer to launch TimeQuest analyzer. i. On the Netlist menu, click Create Timing Netlist and select Post-map to create the timing netlist with timing delay information. ii. Specify your design timing constraints using the analyzer’s graphical user interface (GUI) or by using the Synopsys Design Constraint (SDC) text editor.c. On the Assignment menu, click Timing Analysis Settings to specify TimeQuest analyzer as the timing analysis tool and to add your SDC file to the project.Quartus II Assignment menu provides all settings and assignments for the project.2Run the TimeQuest Timing Analyzer3Compile the Designa. Select one of the following methods to compile the design: i. On the Processing menu, click Start Compilation. ii. On the menu toolbar, click . iii. On the Processing menu, click Compiler Tool and click Start.b. When compilation is complete, refer to the Compilation Report window to view information on compiler settings, resource usage, and compilation equations.Timing analysis is also performed during compilation on the current design, and the Compilation Report window includes the timing information.Get Quartus II Help and Information Refer to the Quartus II Help Press F1 from a highlighted menu command or active dialog box for context-sensitive help Choose Index (Help menu) to view the index Choose Search (Help menu) to perform a search Choose Contents (Help menu) to view the contentsQuartus II Interactive Tutorial The Quartus II software includes a Flash-based Interactive Tutorial. The modules of this tutorial teach you how to use the basic features of the Quartus II design software, including design entry, compilation, timing analysis, simulation, and programming.This tutorial includes audio and Flash animation components, and is best experienced with a sound card and speakers and at least 1024x768 display resolution. Once you start the tutorial, you can jump immediately to any tutorial module by clicking the Contents button. Once you select a tutorial module, you can click the ShowMe, GuideMe, or TestMe buttons at any time to jump directly to the tutorial mode that best suits your learning style.For More InformationIntroduction to the Quartus II Softwarewww.altera.com/literature/manual/intro_to_quartus2.pdfQuartus II Online Demoswww.altera.com/quartusdemosQuartus II Development Software Handbookwww.altera.com/literature/hb/qts/quartusii_handbook.pdfAltera Design Softwarewww.altera.com/products/software/sfw-index.htmlTechnical Supportwww.altera.com/mysupportAltera Technical Literaturewww.altera.com/literature/lit-index.htmlCopyright © 2007 Altera Corporation. All rights reserved. Altera, the stylized Altera logo, specific device designations and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trade-marks and service marks of Altera Corporation in the U.S. and other countries. All other product or service names are the property of their respective holders. Altera products are protected under numerous U.S. and foreign patents and pending applications, mask work rights, and copyrights.P25-36188-00Altera Corporation101 Innovation DriveSan Jose, CA 95134
View Full Document
Unlocking...