Homework Three EE2701. For the clocked synchronous sequential network shown as below, construct theexcitation table, transition table, state table, and state diagram.JCLKKQ/QFF1JCLKKQ/QFF2Clocknot yxxyyynot xnot xnot xz2. For the clocked synchronous sequential network shown as below, construct theexcitation table, transition table, state table, and state diagram.TCLKQ/QFF1TCLKQ/QFF2Clockxxxz1not xz2Homework Three EE2703. Obtain a minimal state table for a clocked synchronous sequential network havinga single input line x, in which the symbols 0 and 1 are applied, and a single outputline z. An output of 1 is to be produced coincident with each third multiple of theinput symbol 1. At all other times the network is to produce 0 outputs. Anexample of input/output sequences that satisfy the conditions of the networkspecifications isX = 0 1 1 0 1 0 1 1 1 1 0 0 0 1 1 1 0 Z = 0 0 0 0 1 0 0 0 1 0 0 0 0 0 1 0 0 4. Obtain a minimal state table for a clocked synchronous sequential network havinga single input line x, in which the symbols 0 and 1 are applied, and a single outputline z. the network is to analyze each sequence of four binary digits and producethe corresponding 2’s-complement of the 4-bit sequence. Assume each 4-bitsequence is occurring with the least significant bit first. An example ofinput/output sequences that satisfy the conditions of the network specifications isX = 0 1 0 1 0 0 0 1 1 1 0 0 0 1 0 0 Z = 0 1 1 0 0 0 0 1 1 0 1 1 0 1 1
View Full Document