GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 1: Reference points spreadsheet for the Half Dome, CA, USGS 7.5' topographicquadrangle.Page -15-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 2: ArcCatalog view of the Yosemite Falls quadrangle zoomed into the SW corner.Page -16-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 3: Setup of “General” properties of the Yosemite Project.Page -17-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 4: Setup of coordinate system for Yosemite Valley project.Page -18-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 5: Utilizing the “Plot XY Data” tool to plot lat-long reference points from the Half Dome quadrangle.Page -19-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 6: Appearance of ArcMap after using the XY Data tool to import the Half Domereference lat-long points.Page -20-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 7: Appearance of raster and reference marks for Half Dome after “Fit to Display” menuoptions was selected.Page -21-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 8: Setting georeference points for the southwest corner of the Half Dome quadrangle.Page -22-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 9: Results of georeference operation summarized statistically in the link table.Page -23-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 10: Using ArcCatalog to create the “YosemiteValley” personal geodatabase file.Page -24-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 11: Creating a feature class in the “YosemiteValley” geodatabase.Page -25-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 12: Initial dialog window for creating a new feature with ArcCatalog.Page -26-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 13: Specifying the coordinate system (spatial reference) for the new feature class.Page -27-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 14: Accepting the default settings for XY tolerance while creating a new featureclass.Page -28-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 15: Field name dialog window for the new feature class wizard- note that the field“Type” is inserted by the user, the other fields are automatic.Page -29-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 16: Appearance of ArcMap project after adding the geodatabase feature layers.Page -30-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 17: ArcMap main window setup during sketching the project border.Page -31-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 18: Setting the classification of the border line.Page -32-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 19: Setting the Linear Feature symbology.Page -33-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 20: Construction and classification of the project border.Page -34-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 21: Creation of initial polygon for project area.Page -35-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 22: Setting the display property of “Land Use” to 50%transparency.Page -36-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 23: Symbol properties dialog window.Page -37-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 24: Setting RGB values for the Wilderness areapolygons.Page -38-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 25: Using the “Cut Polygon Features” task to divide the initial polygon.Page -39-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 26: Initial polygon is cut into 2 separate polygons along the wilderness boundary andboth polygons are highlighted.Page -40-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 27: Valley and Wilderness area polygons defined with “Cut Polygon Features” editortask.Page -41-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 28: Attribute window for Annotation features opened from the properties contextmenu. Page -42-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 29: Changing the position of a vertex.Page -43-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 30: Page and Printer setup dialog.Page -44-GEO/GY461 Applied GISYosemite Valley Project FiguresFigure 31: Final layout view for Yosemite Valley Project.Page
View Full Document