Homework Three EE270 Chapter Seven, Exercise 7.1, 7.3, 7.5, 7.9 1. For the clocked synchronous sequential network shown as below, construct the excitation table, transition table, state table, and state diagram. JCLKKQ/QFF1JCLKKQ/QFF2Clocknot yxxyyynot xnot xnot xz 2. For the clocked synchronous sequential network shown as below, construct the excitation table, transition table, state table, and state diagram. TCLKQ/QFF1TCLKQ/QFF2Clockxxxz1not xz2Homework Three EE270 3. Obtain a minimal state table for a clocked synchronous sequential network having a single input line x, in which the symbols 0 and 1 are applied, and a single output line z. An output of 1 is to be produced coincident with each third multiple of the input symbol 1. At all other times the network is to produce 0 outputs. An example of input/output sequences that satisfy the conditions of the network specifications is X = 0 1 1 0 1 0 1 1 1 1 0 0 0 1 1 1 0 Z = 0 0 0 0 1 0 0 0 1 0 0 0 0 0 1 0 0 4. Obtain a minimal state table for a clocked synchronous sequential network having a single input line x, in which the symbols 0 and 1 are applied, and a single output line z. the network is to analyze each sequence of four binary digits and produce the corresponding 2’s-complement of the 4-bit sequence. Assume each 4-bit sequence is occurring with the least significant bit first. An example of input/output sequences that satisfy the conditions of the network specifications is X = 0 1 0 1 0 0 0 1 1 1 0 0 0 1 0 0 Z = 0 1 1 0 0 0 0 1 1 0 1 1 0 1 1
View Full Document
Unlocking...