DOC PREVIEW
MIT 6 002 - Study Guide

This preview shows page 1 out of 3 pages.

Save
View full document
View full document
Premium Document
Do you want full access? Go Premium and unlock all 3 pages.
Access to all documents
Download any document
Ad free experience
Premium Document
Do you want full access? Go Premium and unlock all 3 pages.
Access to all documents
Download any document
Ad free experience

Unformatted text preview:

Steps: Load set up 6.002 Demo#25A6.002 demo#25 Diode Circuits and Characteristic Prof. Lang Spring 200210 K IN4001 IN4001 1000 uF .1uF 10 uFS2S1720CH2CH35 CH122CH41 K1 KS3S4 X-Y CKT HW Rect FG1IN914 Steps: Load set up 6.002 Demo#25A Part 1: Show the Diode Characteristic curve and later show the Ideal diode curve by increasing the horizontal voltage to 20 volts ( Use MATH/FFT to change the Horizontal voltage ) ! FG1 Should be set at 16 v p-p for this demo Freq = 100 HZ Sine Wave correspond to 2 mA/DivLater show verysteep curveDiode Curve withresistor in Cite as: Anant Agarwal and Jeffrey Lang, course materials for 6.002 Circuits and Electronics, Spring 2007. MIT OpenCourseWare (http://ocw.mit.edu/), Massachusetts Institute of Technology. Downloaded on [DD Month YYYY].Part 2: Load set up 6.002 Demo#25 Show the input signal, the rectifier signal and filtered signal, first show just C1 and notice the ripple and later switch C2 in ( 10X bigger )and observe the ripple which will be almost gone but if you change the amplitude scales you would observed some ripple. Last switch C2 in ( 1000X bigger) and observe that the ripple will be completely gone. FG1 should be set at 3 v p-p for this demo Freq = 100 HZ Sine Wave Show ..6 v, diodedrop3 V P-P Cite as: Anant Agarwal and Jeffrey Lang, course materials for 6.002 Circuits and Electronics, Spring 2007. MIT OpenCourseWare (http://ocw.mit.edu/), Massachusetts Institute of Technology. Downloaded on [DD Month YYYY].AC Line Demo Set Up7A2276337B53AACWe use (2) X10 probes on differential amplifier 7A22 and using caution not to ground any points and theamplifier plug in should be set on AC not DC coupling set the voltage to 5 volts range.Output shown with both sides clipped dueto the large numbers of computersconnected in AC power line NOT aperfect sine wave!switch boxx10 probex10 probe+- Cite as: Anant Agarwal and Jeffrey Lang, course materials for 6.002 Circuits and Electronics, Spring 2007. MIT OpenCourseWare (http://ocw.mit.edu/), Massachusetts Institute of Technology. Downloaded on [DD Month


View Full Document

MIT 6 002 - Study Guide

Documents in this Course
Quiz 2

Quiz 2

8 pages

Quiz 1

Quiz 1

14 pages

Quiz 1

Quiz 1

11 pages

Quiz 1

Quiz 1

10 pages

Quiz #2

Quiz #2

11 pages

Quiz 2

Quiz 2

16 pages

Quiz 2

Quiz 2

11 pages

Quiz #1

Quiz #1

26 pages

Quiz 1

Quiz 1

10 pages

Load more
Download Study Guide
Our administrator received your request to download this document. We will send you the file to your email shortly.
Loading Unlocking...
Login

Join to view Study Guide and access 3M+ class-specific study document.

or
We will never post anything without your permission.
Don't have an account?
Sign Up

Join to view Study Guide 2 2 and access 3M+ class-specific study document.

or

By creating an account you agree to our Privacy Policy and Terms Of Use

Already a member?