1Geometric optics Light in geometric optics is discussed in rays and represented by a straight line with an arrow indicating the propagation direction. Light propagates in straight lines in homogenous medium. Light reflects on interface of two media, following the law of reflection:irθθ=Incident lightNormal of the interfaceReflected lightwith respect to the normal of the interface.with respect to the normal of the interface.2Planar mirror The principle for one sees an image in a planar (flat) mirror is The eyes see the reflected light from the object by the mirror. The brain constructs the image by back tracing two light rays from the same object and use the point these two light rays meet as the image of the object. The two light rays are: the ray that emits from the object, reflects on the mirror and reaches the eye; the ray that emits to the normal of the plane in which the mirror sits. The result: the image is always on the other side of the mirror, virtual, right side up and with equal distance (called the image distance di) to the mirror as the distance of the object to the mirror (called the object distance do). The image has the same height as the object. The word “virtual” means that this image is not “real”, but constructed by your brain instead. Example 1: a penguin sees its toe in a mirror.3Planar mirror Example 2: what is the mirror is not parallel to the penguin?4Planar mirror Example 3: what is the minimum length of this mirror for the penguin to see her full height?5Planar mirror Example 4: the image distances of the first and second order images with respect to their own mirror? A B3 m1 m6Spherical mirror Terminology Concave mirror, the reflecting surface is interior of sphere. Convex mirror: the reflecting surface is exterior of sphere. The principal axis: line through the center of the sphere and the midpoint of mirror.R7Spherical mirror Terminology Focal point (F) light rays parallel to the principal axis reflected by the mirror and meet at or back trace to a point on the axis. Focal length (f): the distance from the mirror midpoint to the focal point.Concave mirrorConvex mirror2Rf =2Rf −=8Spherical mirror The object (height to the principal axis, distance to the midpoint of the mirror) and image (height, distance) relationship: The 3-ray diagram, concave mirror:Ray 1 starts as an incident ray that is parallel to the principal axis. It reflects off the mirror and passes through the focal point after it reflects. Ray 2 starts as an incident ray that passes through the focal point and then reflects parallel to the principal axis. Ray 3 begins as an incident ray that passes through the center of curvature, strikes the mirror perpendicularly, and reflects back, moving along the same line as the incident ray.9Spherical mirror The 3-ray diagram:Ray 2 starts as an incident ray that passes through the focal point and then reflects parallel to the principal axis. Ray 1 starts as an incident ray that is parallel to the principal axis. It reflects off the mirror and passes through the focal point after it reflects. Ray 3 begins as an incident ray that passes through the center of curvature, strikes the mirror perpendicularly, and reflects back, moving along the same line as the incident ray. hohioioiddhh−=≡Magnification MImage up-side-down, smaller, real10Spherical mirror The 3-ray diagram, concave mirror, second exampleRay 1 starts parallel to the principal axis, reflects, and passes through the focal point. Note that we extend the reflected ray backward through the mirror surface as a virtual ray (dashed line). Ray 2 must pass through the focal point before reaching the mirror. We draw it as passing through the focal point before intersecting the penguin’s head. It then strikes the mirror and reflects parallel to the principal axis. Ray 3 starts at C. It passes by the penguin’s head and reflects back through C. Image upright, larger, virtual11Spherical mirror The 3-ray diagram, convex mirror:Ray 1. Ray 1 is incident parallel to the principal axis. If we extend the reflected component of this ray backward through the mirror, the virtual ray will pass through the focal point. Ray 2. Instead of passing through the focal point, the incident part of ray 2 is directed toward it. Before it can reach the focal point behind the mirror, it reflects parallel to the principal axis. Its virtual extension behind the mirror is also parallel to the axis. Ray 3. The incident component of Ray 3 is directed toward the center of curvature on the far side of the mirror and reflects back along the same line. The virtual extension of the reflected ray passes through the center of curvature.12Spherical mirror The 3-ray diagram, convex mirror:Image always upright, smaller, virtual13Spherical mirror The object (height to the principal axis, distance to the midpoint of the mirror) and image (height, distance) relationship: The mirror equation (for both concave and convex mirrors):fddoi111=+oioiddhhm −=≡Together with this: One can analytically solve many problems.14Spherical mirror The object (height to the principal axis, distance to the midpoint of the mirror) and image (height, distance) relationship: The sign conventions:Concave mirrorconvergesConvex mirrordiverges15Spherical mirror Example 1. Use the 3-ray diagram to exam for both concave and convex mirrors when the object is (1) more than 2f away from the mirror midpoint (2) between 2f and f (3) between F and the midpoint of the
View Full Document
Unlocking...