File TransferFile Transfer With “ssh”Slide 3Slide 4Slide 5Slide 6Slide 7Lect 20A P. 1 Engineering H192 - Computer Programming Winter QuarterThe Ohio State UniversityGateway Engineering Education CoalitionFile TransferLecture 20ALect 20A P. 2 Engineering H192 - Computer Programming Winter QuarterThe Ohio State UniversityGateway Engineering Education CoalitionFirst, login to the UNIX system. To do that, bring upSecure Shell Client (Go to Start, Programs, Secure Shell Client) and click on “Quick Connect”.File Transfer With “ssh”Lect 20A P. 3 Engineering H192 - Computer Programming Winter QuarterThe Ohio State UniversityGateway Engineering Education CoalitionFile Transfer With “ssh”•You will get a login window as shown below. Fill in the blanks (Note the host is r1rhl.eng.ohio-state.edu) and click on Connect.Lect 20A P. 4 Engineering H192 - Computer Programming Winter QuarterThe Ohio State UniversityGateway Engineering Education CoalitionFile Transfer With “ssh”•You will be prompted to enter your password. Do so to complete the login process.•Once logged in, click on the Window menu and select New File Transfer. When that window is active you can click on My Computer on the desk top, select the drive that has the file to be transferred and use drag-and-drop to transfer the file (be sure to select ASCII on the tool bar first).Lect 20A P. 5 Engineering H192 - Computer Programming Winter QuarterThe Ohio State UniversityGateway Engineering Education CoalitionFile Transfer With “ssh”•Click on the Window menu and select New File Transfer.Lect 20A P. 6 Engineering H192 - Computer Programming Winter QuarterThe Ohio State UniversityGateway Engineering Education CoalitionFile Transfer With “ssh”•To drag-and-drop, click and hold on the file to be transferred and drag it to the other window. Here we copy from a disk drive on the PC to our account on UNIX.Lect 20A P. 7 Engineering H192 - Computer Programming Winter QuarterThe Ohio State UniversityGateway Engineering Education CoalitionFile Transfer With “ssh”•When finished, you can close the file transfer window (click on the X in the upper right corner) and then either continue to use the Secure Shell Client or disconnect and login with X-Win32 to edit, compile/link and run your
View Full Document