Process Data for AMI06 processSpice Level 1 Equations:Process Data for AMI06 process Parameter (unit) Value(NMOS)Value(PMOS)W Minimum (cm) 1.5x10-41.5x10-4L Minimum (cm) 0.6x10-40.6x10-4TOX (cm) .014x10-4.014x10-4CGDO (F/cm) 1.99x10-122.4x10-12CGSO (F/cm) 1.99x10-122.4x10-12CJSW (F/cm) 3.85x10-123.11x10-12CJ (F/cm2) 4.23x10-87.27x10-8VT (V) @ Ln =0.6x10-4.6 -.82KNP /KPP A/V246.3x10-630x10-6Length of Source or Drain(cm) (DD)1.5x10-41.5x10-4 Spice Level 1 Equations:NMOS:PMOSIDKNP2WNLNeff 2 VGSVTN VDS VDS2 1 VDS IDKNP2WNLNeff VGSVTN 2 1 VDS VGSVTN and VDSVGSVTNVGSVTN and VDSVGSVTNIDKPP2WPLPeff 2 VGSVTP VDS VDS2 1 VDS VGSVTN and VDSVGSVTNVGSVTN and VDSVGSVTNIDKPP2WPLPeff VGSVTP 2 1 VDS VTNVTN0 2FVSB 2F VTPVTP0 2FVSB 2F LNeffLN2 LDLPeffLP2 LDKNPNCox KPPPCox2 Si q NACox 2 Si q NDCoxNote: LD=DDFor an inverter NSP=1, NSN=1, M=1, and N=1, S will be one for most cases in EE166.Cin for AMI06 Wn=1.5um and Wp=3.0um-7.5fFThe lines represent the part of the load capacitance that is not due to thedriver. It can be Cg if Cint is zero or Cg+Cint if Cint is not zero. Thebottom line is 5fF. The second from the bottom is 10fF and each lineafter that increases by 10fF. The top line is
View Full Document