212213Copyright © 2004 - Kristen KurlandCopyright © 2004 - Kristen KurlandChapter 16Enhancing the DrawingProcess214215Copyright © 2004 - Kristen KurlandCopyright © 2004 - Kristen KurlandCreating SectionsCreating SectionsCreating Sections 16.11. Open the drawing called 3DBottle.DWG2. Create a layer called Section. Make it the current layer.3. Choose Draw, Solids, Section.4. Choose all 3 solids making up the bottle.Select objects:Specify first point on Section plane by [Object/Zaxis/View/XY/YZ/ZX/3points] : ZXSpecify a point on the ZX-plane <0,0,0>:quad ofbottle.5. 3DRotate the section to a flat plane.216217Copyright © 2004 - Kristen KurlandCopyright © 2004 - Kristen KurlandSlice Command & Setting Up a 3D DrawingSlice Command & Setting Up a 3D DrawingSlice 16.2Slices a set of solids with a plane.1. Choose Modify, Draw, Slice.or2. Type SLICE at the command prompt.Command: sliceSlice plane by Object/Zaxis/View/XY/YZ/ZX/<3points>: ZXPoint on ZX plane <0,0,0>: quad of bottleBoth sides/<Point on desired side of the plane>: pick theside of the bottle you want to keep.218219Copyright © 2004 - Kristen KurlandCopyright © 2004 - Kristen KurlandDrawing with a Model Space ViewSlice Command & Setting Up a 3D DrawingCreate a SOLVIEW Viewport 16.31. Choose File, New...2. Choose Use a Template from the startup dialog.3. Double Click Ansi_c.dwt as the template file to start from.This create a new drawing with a border andone floating Model Space.4. Double Click MODEL from the Status Bar. Note thechange to Paper Space.5. Double Click PAPER from the Status Bar to toggle back toModel Space.Slice Command & Setting Up a 3D Drawing220221Copyright © 2004 - Kristen KurlandCopyright © 2004 - Kristen KurlandModel Space View ResizedSlice Command & Setting Up a 3D DrawingModel Space View Scaled 1XPInsert a Drawing1. Choose Insert, Block...2. Choose the drawing called 3DBOTTLE.DWG toinsert.3. Insert the block anywhere in the Model Space viewat a scale of 1 and rotation 0.4. Double Click MODEL at the Status Bar and resize theModel Space view port in Paper Space.5. Double Click PAPER at the Status Bar to return to ModelSpace.6. Type ZOOM, 1XP at the command prompt.Slice Command & Setting Up a 3D Drawing222223Copyright © 2004 - Kristen KurlandCopyright © 2004 - Kristen KurlandSolview & SoldrawCreate an Orthogonal View1. Choose Draw, Solids, Setup, View.or2. Type SOLVIEW at the command prompt.Command: solviewUcs/Ortho/Auxiliary/Section/<eXit>: OPick side of viewport to project: P1View center: P2Clip first corner: P3Clip other corner: P4View name: frontUcs/Ortho/Auxiliary/Section/<eXit>:Solview & Soldraw224225Copyright © 2004 - Kristen KurlandCopyright © 2004 - Kristen KurlandSection in a Model ViewSolview & SoldrawCreate a 2D Section with Soldraw 16.4Generates profiles and sections in viewports created with SOLVIEW.SOLDRAW can only prepare viewports that have been created withSOLVIEW.1. Choose Draw, Solids, Setup, Drawing.or2. Type Command: soldrawSelect viewports to draw: P1Select objects: 1 foundSelect objects: enter3 solids selected.NOTE: If your object was an inserted block, you need tofirst explode it so it becomes a solid.Resultant Section and SolidSolview & Soldraw226227Copyright © 2004 - Kristen KurlandCopyright © 2004 - Kristen Kurland3D Model ViewCreating a 3D ViewCreate a 3D View Using UCS 16.51. Click MSPACE and the plan view of the 3D Bottle.2. Choose View, 3D Viewport, SW Isometric...3. Type UCS at the command prompt.Command: ucsOrigin/ZAxis/3point/OBject/View/X/Y/Z/Prev/Restore/Save/Del/?/<World>: viewThis sets the current UCS parallel to thescreen. We now need to save this ucs.4. Type UCS at the command prompt.Command: ucscsOrigin/ZAxis/3point/OBject/View/X/Y/Z/Prev/Restore/Save/Del/?/<World>: save?/Desired UCS name: 3dview5. Click PSPACE at the command prompt.6. Choose Draw, Solids, Setup, ViewCommand: solviewUcs/Ortho/Auxiliary/Section/<eXit>: uNamed/World/?/<Current>: nName of UCS to restore: 3dviewEnter view scale<1.0000>: enterView center: pickView center: pickCreating a 3D View228229Copyright © 2004 - Kristen KurlandCopyright © 2004 - Kristen KurlandResultant 3D ModelCreate Hidden Line RemovalsCreate a Hidden Line View 16.61. Double Click MODEL to return to Model Space.2. Choose Draw, Solids, Setup, Profile.or3. Type SOLPROF at the command prompt.Command: solprofSelect objects: pick solidsSelect objects: enterDisplay hidden profile lines on separatelayer? <Y>: enterProject profile lines onto a plane? <Y>: enterDelete tangential edges? <Y>: enter3 solids selected.Create Hidden Line