DOC PREVIEW
Rose-Hulman ECE 320 - Syllabus

This preview shows page 1 out of 4 pages.

Save
View full document
View full document
Premium Document
Do you want full access? Go Premium and unlock all 4 pages.
Access to all documents
Download any document
Ad free experience
Premium Document
Do you want full access? Go Premium and unlock all 4 pages.
Access to all documents
Download any document
Ad free experience

Unformatted text preview:

ECE-320 Linear Control Systems Spring 2005 Dr. Bob Throne x-8414, Room D-221 Text: There is no single textbook that works for all topics. For most of the topics we cover, I will put some notes on the class website. These notes are distinct from the notes I will be using in class and generally will have different examples than those I use in class. However, these notes are not complete yet. GRADING POLICY (Spring Graduating Seniors Only) Each Exam 25% each Labs 25% Homework/Matlab/Simulink 15% Quizes 10% (All Others) Midterm Exam 20% Final Exam 30% Labs 25% Homework/Matlab/Simulink 15% Quizes 10% Notes: (1) You must have a passing average (greater than or equal to 60%) on the exams to pass the class! (2) Homework assignments are due at 10:00 AM on Tuesday. No late homework will be accepted without prior approval. (3) You must acceptably complete each lab to pass the class. (4) For the majority of the labs, you will be required in the preceding homework to derive some relationships we will be using in lab or simulate a system (or systems) . If you understand the homework the lab should not be a problem.You will be told which parts of the homework are required for the lab. You will receive a 0 on the corresponding lab if you have not done this acceptably! However, you must still complete the homework and do the lab to pass the course. (5) Many of the homework problems will require you to use Matlab or Simulink as part of the problem. If you do not do these parts of the problem, you will receive no credit for any parts of the problem. (6) You are expected to do your own work. You can certainly talk with each other and help each other, but the work you hand in should be your own. As an example, if two people hand in the same Simulink plot and both came from the same directory, neither will receive any points! (7) Unless specifically told otherwise on a particular problem, you cannot turn in any Maple code or plot as part of the solution to a problem.Labs: 1) You will work in groups of two. 2) Your lab must be printed out before coming to lab each week. I reserve the right to deduct half of the lab points if you don't have your lab printed out at the time the bell rings. There are no prelabs (except for homework problems), so this is not all that much to ask. The printer in C-116 hardly ever works, so don't depend on it! 3) You need to read the lab before you come to lab. If you read through the lab you will (hopefully) get the big picture and understand what we are trying to do. If you just blindly follow the steps in the lab with no thought as to where you are going, you will get little from the labs. 4) You must write a short memo summarizing your results. This memo is due before your next lab period.. You should include as attachments in the memo the plots and you made for the lab. The lab write up is generally to be computer generated and each graph needs to be labeled as a figure (with a caption). Usually students find it easier to just copy and paste all the figures they need into a document and explain the figure or answer questions as they are doing the lab.SYLLABUS Lab 1 - Matlab, Simulink, the ECP systems Class 1 (3/7) - Laplace Transforms/Partial Fractions Class 2 (3/9) – Laplace Transforms/Partial Fractions Class 3 (3/11) – Laplace Transforms, Final Value Theorem Lab 2 – Log Decrement and Step Response for System Identification Class 4 (3/14) – Position and Velocity Errors Class 5 (3/16) - Response of 2nd Order Systems, Performance Specifications Class 6 (3/18) - Characteristic Polynomial and Modes, Stability Lab 3 - Time and Frequency Domain System Identification (two 1 dof systems) Class 7 (3/21) – Block Diagram Manipulation Class 8 (3/23) – Model Matching (ITAE, Deadbeat) Class 9 (3/25) - Quadratic Optimal Systems Lab 4 – Time and Frequency Domain System Identification (one 2 dof system) Class 10 (3/28) – Quadratic Optimal Systems Class 11 (3/30) – Steady State Errors, System Type Class 12 (4/1) – The Root Locus Spring Break Lab 5 – ITAE, Deadbeat, and Quadratic Optimal Systems Class 13 (4/11) – Root Locus for Compensator Design Class 14 (4/13) -- Root Locus for Compensator Design Class 15 (4/15) – Exam 1 Lab 6 – Root Locus Design (Matlab's sisotool) Class 16 (4/18) – Lag Compensators Class 17 (4/20) - Coefficient Matching - Diophantine Equations Class 18 (4/22) – Coefficient Matching - Diophantine Equations Lab 7 – Root Locus Design Class 19 (4/25) - Coefficient Matching - Diophantine Equations Class 20 (4/27) – System Sensitivity Class 21 (4/29) – State Variable Systems Lab 8 – Coefficient Matching- Diophantine Equations Class 22 (5/2) – State Variable Systems Class 23 (5/4) – Pole Placement for State Variable Feedback Class 24 (5/6) – Pole Placement for State Variable Feedback Lab 9 – State variable control for 1 and 2 degree of freedom systems Class 25 (5/9) - Bode Plots, Phase and Gain Margins Class 26 (5/11) - Bode Plots, Phase Lead Compensators Class 27 (5/13) - Bode Plots, Phase Lead Compensators Lab 10 - Controlling an Inverted Pendulum Class 28 (5/16) - Linearization Class 29 (5/18) - Linearization Class 30 (5/20) - Exam 2 (Spring Graduating


View Full Document

Rose-Hulman ECE 320 - Syllabus

Documents in this Course
Load more
Download Syllabus
Our administrator received your request to download this document. We will send you the file to your email shortly.
Loading Unlocking...
Login

Join to view Syllabus and access 3M+ class-specific study document.

or
We will never post anything without your permission.
Don't have an account?
Sign Up

Join to view Syllabus 2 2 and access 3M+ class-specific study document.

or

By creating an account you agree to our Privacy Policy and Terms Of Use

Already a member?